Installation and User Guide VADDIO™ WALLVIEW™ CCU HD-20 HD-SDI High Definition PTZ Camera Featuring the Quick-Connect™ CCU Interface and the EZIM HD-SDI Slot Card Model Number 999-6958-000 (North America) Model Number 999-6958-001 (International) EZIM HD-SDI Slot Card for HD-20 Quick-Connect CCU for HD-18 / HD-20 ©2011 Vaddio - All Rights Reserved ● WallVIEW CCU HD-20 HD-SDI ● Document Number 324-0182 Rev.
WallVIEW CCU HD-20 HD-SDI Inside Front Cover - Blank WallVIEW CCU HD-20 HD-SDI Manual 342-0182 Rev.
WallVIEW CCU HD-20 HD-SDI WallVIEW CCU HD-20 HD-SDI Overview: The WallVIEW CCU HD-20 HD camera, Quick-Connect CCU and HDSDI Slot Card delivers a system that allows for easy installation and integration. The HD-20 camera is built around a 6.49mm diagonal (1/2.8 Type) high-speed CMOS image sensor with a total of 3.27M pixels and a 20x optical zoom lens, making it the ideal choice for a wide range of HD video applications.
WallVIEW CCU HD-20 HD-SDI UNPACKING: Carefully remove the device and all of the parts from the packaging. Unpack and identify the following parts for 999-6957-000: • One (1) ClearVIEW HD-20 HD Camera • One (1) Vaddio IR Remote Commander • One (1) Quick-Connect CCU Interface • One (1) EZIM HD-SDI Slot Card • One (1) 36 VDC, 2.
WallVIEW CCU HD-20 HD-SDI ClearVIEW HD-20 PTZ Camera, Rear View with Feature Call-outs: ⑤ ⑨ ⑥ ⑩ ⑦ ⑪ ⑧ ⑫ 5) RS-232 IN & IR Out: The RS-232 accepts modified VISCA protocol for camera control, as well as transmits IR signaling received by the IR receivers, which can be transmitted to third party devices. 6) Dip Switch Settings: Settings for IR remote, baud rate, SD output format, and image flip can be configured on these switches. See page 5 for additional information on switch settings.
WallVIEW CCU HD-20 HD-SDI Quick-Connect CCU Front Panel Controls (left to right): Tally Light: The blue LED tally light on the front panel is tied to the tally contacts on the rear panel allowing the user to easily track which camera interface is being used in a multi-camera system by supplying a simple contact closure. LCD Display: Backlit (blue) display indicates which parameter (iris, detail, etc.) is being adjusted.
WallVIEW CCU HD-20 HD-SDI Quick Connect CCU Rear Panel Connections and Controls (left to right) Power Supply Input: 36V 2.78 Amp power supply on a 5.5mm OD x 2.5mm ID connector. Power on RJ-45: Power is provided on a Cat-5e cable to the EZIM HD-SDI Slot Card. Power is on all 4-pr and is connected to the 36VDC RJ-45 on the EZIM HD-SDI Slot Card. RS-232 IN on RJ-45: RS-232 IN from ProductionVIEW or PTZ controller RS-232 port. Daisy Chain control is not supported.
WallVIEW CCU HD-20 HD-SDI EZIM HD-SDI Slot Card: Using only the most advanced and leading edge components available today, the EZIM HD-SDI Slot Card paired with the HD-20 PTZ camera produces remarkable picture quality. Anatomy of the Vaddio EZIM HD-SDI Slot Card: 1) Two (2) HD-SDI/SDI Outputs on BNC a.
WallVIEW CCU HD-20 HD-SDI Installing the EZIM HD-SDI Slot Card: • The Slot Card will be packed separately. To install the EZIM HD-SDI Slot Card, remove all power connections and be certain that the HD20 camera is not powered up before attempting to install the EZIM HD-SDI Slot Card. Remove the blank plate (1) that covers the card slot opening. Retain the blank panel as needed in case the Slot Card is ever removed.
WallVIEW CCU HD-20 HD-SDI First Time Set-up: Using the HD Video Select Rotary Switch and Camera Settings Dip Switch on the back of the camera, set up the camera’s output resolution and functional preferences. There is a label on the bottom of the camera that identifies the choices.
WallVIEW CCU HD-20 HD-SDI Installation Basics: The WallVIEW CCU HD-20 camera was specifically designed for installation on a vertical wall surface with Cat-5e cable connectivity for Video, Power and Control signaling (three Cat-5e cables are required). Installation is simplified in that no custom 8-Pin mini-din cables or expensive plenum coax cables are needed and no power outlets are required near the camera bracket. All cabling is routed to the head-end using Cat-5e cables.
WallVIEW CCU HD-20 HD-SDI Basic System Connectivity with the EZIM CCU and the EZIM CCU Slot Card in the HD-20 Camera HD-20 Rear with EZIM HD-SDI Slot Card Note: HDMI video and Analog HD YPbPr video outputs remain active for local use while a CCU and HD-SDI Slot Card are used. Two (2) Cat-5e Cables Up to 500’ (152.4m) PowerRite Power Supply 36VDC Power (4pr.
WallVIEW CCU HD-20 HD-SDI Installation Instructions: Step 1: After determining the optimum location of the camera system, route, mark and test the required two (2) Cat-5e cables and the HD-SDI coax from the camera to the Quick-Connect CCU Interface located at the head-end. The three Cat-5e cables should feed-through the oval slot located on the rear flange of the wall mount.
WallVIEW CCU HD-20 HD-SDI General Specifications: WallVIEW CCU HD-20 HD-SDI Part Numbers WallVIEW CCU HD-20: 999-6957-000 (North America) WallVIEW CCU HD-20: 999-6957-001 (International) Vaddio ClearVIEW HD-20 Image Device Picture Elements HD Resolutions Lens Focal Length Horizontal Viewing Angle Invertible Video S/N Ratio Minimum Illumination Serial Control Protocol Min. Object Distance Pan Range Tilt Range HD Video Select Camera Settings Preset Positions Dimensions/Weight 6.49mm diagonal (1/2.
WallVIEW CCU HD-20 HD-SDI Compliance and CE Declaration of Conformity - HD-20 PTZ Camera Compliance testing was performed to the following regulations: • • • • • • • FCC Part 15, Subpart B ICES-003, Issue 4: 2004 European Standard EN 55022 A: 2006 + A1: 2007(CISPR 22:2005/A1:2005) AS/NZS CISPR 22: 2009 VCCI V-3/2010.
WallVIEW CCU HD-20 HD-SDI Compliance and CE Declaration of Conformity - Quick-Connect CCU Compliance testing was performed to the following regulations: • • • • • FCC Part 15, Subpart B ICES-003, Issue 4: 2004 European Standard EN 55022 A: 1998 + A1: 2000 European Standard EN 55024: 1998 + Amendments A1: 2001 + A2: 2002 EMC Directive 89/336/EC Class A Class A Class A Class A Class A FCC Part 15 Compliance This equipment has been tested and found to comply with the limits for a Class A digital device, pu
WallVIEW CCU HD-20 HD-SDI Compliance and CE Declaration of Conformity - HD-20 PTZ Camera Compliance testing was performed to the following regulations: • • • • • • • FCC Part 15, Subpart B ICES-003, Issue 4: 2004 EMC Directive 2004/108/EC EN 55022 A: 2006 + A1 2007 (CISPR 22:2005/A1:2005) EN 55024: 1998 + Amendments A1: 2001 + A2: 2003 AS/NZS CISPR 22: 2006, VCCI V-3/2009.
WallVIEW CCU HD-20 HD-SDI WARRANTY INFORMATION (See Vaddio Warranty Policies posted on vaddio.com for complete details): Hardware* Warranty: One year limited warranty on all parts. Vaddio warrants this product against defects in materials and workmanship for a period of one year from the day of purchase from Vaddio. If Vaddio receives notice of such defects during the warranty period, they will, at their option, repair or replace products that prove to be defective.
WallVIEW CCU HD-20 HD-SDI Appendix 1: YPbPr Video Pin-Out for the HD-20 Camera & Quick-Connect Analog YPbPr Output Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 YPbPr Pr Y Pb Pr GND Y GND Pb GND - EZIM HD-SDI Slot card Pin out Assignments (568B Wiring Standard) Power Connector RJ-45 Pin Power 1 Power+ 2 Power3 Power+ 4 Power5 Power+ 6 Power7 Power+ 8 Power- 12345678 POWER 36V Appendix 2: ClearVIEW HD-20 Dimensions WallVIEW CCU HD-20 HD-SDI Manual 342-0182 Rev.
WallVIEW CCU HD-20 HD-SDI Appendix 3: Communication Specification Communication Speed: 9600 bps (default) Start bit: 1 Stop bit: 1 Data bits: 8 Parity: None No Flow control 12345678 Pin # 1) 2) 3) 4) 5) 6) 7) 8) RJ-45 RS-232 and IR Out Pins Unused Unused Unused IR Output (Diff Signal to Quick-Connect) IR Ground (Diff Signal to Quick-Connect) GND (GND of IR Short Range - Pin 3) RXD (from TXD of control source) TXD (to RXD of control source) NOTE: The Vaddio ClearVIEW HD-20 Control Protocol is similar, b
WallVIEW CCU HD-20 HD-SDI HD-20 Command List (2/2) Command Set V Command Command Packet CAM_Backlight Y Y Y Y Y Y Y Y Y Y Y Y Y N+ N+ Y Y Y Y Y Y Y Y Y Y On Off Reset Up Down Direct Reset Set Recall 81 01 04 33 02 FF 81 01 04 33 03 FF 81 01 04 02 00 FF 81 01 04 02 02 FF 81 01 04 02 03 FF 81 01 04 42 00 00 0p 0q FF 81 01 04 3F 00 0p FF 81 01 04 3F 01 0p FF 81 01 04 3F 02 0p FF 81 01 04 22 0p 0q 0r 0s FF 81 01 06 08 02 FF 81 01 06 08 03 FF 81 01 06 08 10 FF 81 01 7D 01 03 00 00 FF 81 01 7D 01 13 00 00
WallVIEW CCU HD-20 HD-SDI HD-20 Inquiry List (1/1) Inquiry Command V Command Command Packet Comments CAM_PowerInq Y 81 09 04 00 FF CAM_ZoomPosInq CAM_WBModeInq Y Y 81 09 04 47 FF 81 09 04 35 FF CAM_RGain CAM_BGain CAM_AEModeInq Y Y Y 81 09 04 43 FF 81 09 04 44 FF 81 09 04 39 FF CAM_Iris CAM_Gain CAM_BacklightModeInq Y Y Y 81 09 04 4B FF 81 09 04 4C FF 81 09 04 33 FF CAM_FocusPosInq CAM_ApertureInq CAM_MemoryInq CAM_IDInq CAM_ReceiveInq Y Y Y Y Y 81 09 04 48 FF 81 09 04 42 FF 81 09 04 3F
RAR WallVIEW CCU HD-20 HD-SDI WallVIEW CCU HD-20 HD-SDI Manual 342-0182 Rev.
WallVIEW CCU HD-20 HD-SDI 9433 Science Center Drive, Minneapolis, MN 55428 Toll Free: 800-572-2011 ▪ Phone: 763-971-4400 ▪ FAX: 763-971-4464 www.vaddio.com ©2011 Vaddio - All Rights Reserved. Reproduction in whole or in part without written permission is prohibited. Specifications and pricing are subject to change without notice. Vaddio, ClearVIEW, ProductionVIEW, Quick-Connect, WallVIEW, EZCamera, HSDS and PowerRite are registered trademarks of Vaddio.
