INSTALLATION AND USER GUIDE VADDIO™ WALLVIEW™ HD-18 High Definition PTZ Camera featuring the CONCEAL™ Wall Mounting System and the HD-18 Quick-Connect™ SR Model Number 999-6905-000 (North America) Model Number 999-6905-001 (International) Model Number 999-6905-000W (North America) Model Number 999-6905-001W (International) Arctic White Version HD-18 Quick-Connect SR Interface ©2012 Vaddio - All Rights Reserved. WallVIEW HD-18 - Document Number 341-888 Rev.
WallVIEW HD-18 WallVIEW HD-18 Overview With the WallVIEW HD-18 PTZ camera and CAT-5 cabling system, Vaddio delivers a system that allows for easy installation and integration of camera systems. The camera is built around a 1.3 megapixel, 1/3” CCD with an 18x optical zoom lens, making it the ideal choice for a wide range of high definition video applications. In addition to the component HD output (720p, 1080i or 1080p), the camera comes with a simultaneous composite SD output (NTSC or PAL).
WallVIEW HD-18 UNPACKING: Carefully remove the device and all of the parts from the packaging.
WallVIEW HD-18 5 9 6 10 7 11 12 8 Rear of WallVIEW HD-18 5. 6. 7. 8. 9. 10. 11. 12. RS-232 In & IR Out – The RS-232 accepts modified VISCA™ protocol for camera control, as well as transmits IR signaling received by the IR receivers, which can be transmitted to third party devices. DIP Switch Settings – Settings for IR remote, baud rate, SD output format, image flip can be configured on these switches. See page 6 for additional information switch settings.
WallVIEW HD-18 Figure 4: Quick-Connect SR (rear) 13 17 14 13. 14. 15. 16. 17. 15 16 Power Input – The 24 VDC power adapter powers the Quick-Connect SR and also sends power to the HD-18 camera. Power & HD Video – The CAT-5 connection that extends to the EZ-Port Power/Video connector on the HD-18 camera. Maximum distance on the CAT-5 cable is 100 feet (30.5 m). HD Video Output – DB-15 connector that outputs the component HD video extended from the camera over CAT-5 cabling.
WallVIEW HD-18 Getting Started: First, set up the HD and SD output resolutions for the camera, along with IR output, baud rate and image flip. On the next page are the options for the switches that are found on the back of the camera.
WallVIEW HD-18 Figure 6: Standard wiring configuration of the camera to a Vaddio Joystick controller. Rear Panel HD-18 YPbPr & Power on one (1) Cat 5e up to 100’ (30.
WallVIEW HD-18 The two (2) Cat-5e cables should feed-through a 1”(25.4mm) opening (circular or square shape) centered in the rectangular slot located on the rear flange of the CONCEAL Wall Mount Bracket (see Fig. 7). Note: Do not cut out the entire rectangular slot opening in the wall! This will not allow the two (2) lower wall anchors to correctly fasten the Conceal Wall Mount to the wall (see Fig. 7).
WallVIEW HD-18 Step 5: Follow the sample wiring diagram on this page for connecting the Cat-5e cables to the camera and QuickConnect Short Range, using a compatible Vaddio ProductionVIEW joystick camera controller. Additional diagrams are available on our website for installation with a variety of videoconference codecs, utilizing the RS-232 Input and Output connectors for IR signaling. Note: Check all Cat-5e cables for continuity in advance of the final connection.
WallVIEW HD-18 Compliance and CE Declaration of Conformity FCC Part 15 Compliance This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
WallVIEW HD-18 Warranty Information: Hardware* Warranty - One year limited warranty on all parts. Vaddio warrants this product against defects in materials and workmanship for a period of one year from the day of purchase from Vaddio. If Vaddio receives notice of such defects during the warranty period, they will, at their option, repair or replace products that prove to be defective.
WallVIEW HD-18 Appendix 1: Video Pin-out Table for WallVIEW HD-18 Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 YPbPr Pr Y Pb Pr GND Y GND Pb GND - EZCamera Power & HD Video RJ-45 Connector Pin-outs For HD-18 Camera and Quick-Connect HD-18 SR (568B Wiring Standard) Pin 1 2 3 4 5 6 7 8 YPbPr Power+ PowerY+ PB+ PB GND Y GND PR+ PR- 12345678 Appendix 2: Camera Dimensions WallVIEW HD-18 Manual 341-888 Rev.
WallVIEW HD-18 Appendix 3: Communication Specification Communication Speed: 9600 bps (default) Start bit: 1 Stop bit: 1 Data bits: 8 Parity: None No Flow control 12345678 Pin # 1) 2) 3) 4) 5) 6) 7) 8) RJ-45 RS-232 and IR Out Pins Unused Unused IR Out (TTL level) IR Output (Diff Signal to HD-18 Quick-Connect) IR Ground (Diff Signal to HD-18 Quick-Connect) GND (GND of IR Short Range - Pin 3) RXD (from TXD of control source) TXD (to RXD of control source) NOTE: The Vaddio ClearVIEW HD-18 Control Protocol
WallVIEW HD-18 HD-18 Command List (2/2) Command Set V Command Command Packet CAM_Backlight Y Y Y Y Y Y Y Y Y Y Y Y Y N+ N+ Y Y Y Y Y Y Y Y Y Y On Off Reset Up Down Direct Reset Set Recall 81 01 04 33 02 FF 81 01 04 33 03 FF 81 01 04 02 00 FF 81 01 04 02 02 FF 81 01 04 02 03 FF 81 01 04 42 00 00 0p 0q FF 81 01 04 3F 00 0p FF 81 01 04 3F 01 0p FF 81 01 04 3F 02 0p FF 81 01 04 22 0p 0q 0r 0s FF 81 01 06 08 02 FF 81 01 06 08 03 FF 81 01 06 08 10 FF 81 01 7D 01 03 00 00 FF 81 01 7D 01 13 00 00 FF 81 01 0
WallVIEW HD-18 HD-18 Inquiry List (1/1) Inquiry Command V Command Command Packet Comments CAM_PowerInq Y 81 09 04 00 FF CAM_ZoomPosInq CAM_WBModeInq Y Y 81 09 04 47 FF 81 09 04 35 FF CAM_RGain CAM_BGain CAM_AEModeInq Y Y Y 81 09 04 43 FF 81 09 04 44 FF 81 09 04 39 FF CAM_Iris CAM_Gain CAM_BacklightModeInq Y Y Y 81 09 04 4B FF 81 09 04 4C FF 81 09 04 33 FF CAM_ApertureInq CAM_MemoryInq CAM_IDInq CAM_ReceiveInq Y Y Y Y 81 09 04 42 FF 81 09 04 3F FF 81 09 04 3F FF 81 09 06 08 FF Pan-TiltMa
WallVIEW HD-18 9433 Science Center Drive, Minneapolis, MN 55428 Toll Free: 800-572-2011 ▪ Phone: 763-971-4400 ▪ FAX: 763-971-4464 www.vaddio.com ©2012 Vaddio - All Rights Reserved. Reproduction in whole or in part without written permission is prohibited. Specifications and pricing are subject to change without notice. Vaddio, ProductionVIEW, Quick-Connect, ControlVIEW, WallVIEW, EZCamera and PowerRite are registered trademarks of Vaddio. All other trademarks are property of their respective owners.
