INSTALLATION AND USER GUIDE VADDIO™ WALLVIEW™ HD-19 SYSTEM High Definition PTZ Camera Featuring the CONCEAL™ Wall Mounting System and the HD-18 Quick-Connect™ SR Arctic White Version Part Number 999-6945-000AW (North America) Part Number 999-6945-001AW (International) Black Version Part Number 999-6945-000 (North America) Part Number 999-6945-001 (International) Quick-Connect SR Interface PN: 998-1105-016 ©2012 Vaddio - All Rights Reserved ● WallVIEW HD-19 ● Document Number 342-0266 Rev.
ClearVIEW HD-19 Inside Front Cover - Blank ClearVIEW HD-19 Manual 342-0266 Rev.
ClearVIEW HD-19 Overview: The WallVIEW HD-19 HD PTZ camera with Vaddio’s EZCamera™ Cat-5e cabling system using HSDS™, delivers a system that allows for easy installation and integration of cameras. The HD-19 camera is built around a 1/3 high-speed, progressive scan CMOS image sensor with a total of 1.
ClearVIEW HD-19 Unpacking: Carefully remove the device and all of the parts from the packaging. Unpack and identify the following parts in 999-6945-000: One (1) ClearVIEW HD-19 HD Camera One (1) Vaddio IR Remote Commander One (1) Quick-Connect SR Interface One (1) Vaddio PowerRite™ 24 VDC, 2.
ClearVIEW HD-19 ClearVIEW HD-19 PTZ Camera, Rear View with Feature Call-outs: ⑤ ⑥ ⑨ ⑩ ⑦ ⑪ ⑧ ⑫ 5) RS-232 IN & IR Out: The RS-232 accepts modified VISCA protocol for camera control, as well as transmits IR signaling received by the IR receivers, which can be transmitted to third party devices. 6) Dip Switch Settings: Settings for IR remote, baud rate, SD output format, and image flip can be configured on these switches. See page 5 for additional information on switch settings.
ClearVIEW HD-19 Quick-Connect SR Interface Rear Panel with Feature Call-outs: ① ② ③ ④ ⑤ 1) Power Input: 5.5mm OD x 2.5mm ID coaxial connector for the provided PowerRite 24 VDC, 2.0 Amp power supply. 2) EZCamera Power & HD Video: A single Cat-5e connection between the EZCamera Power & HD Video RJ-45 connector and the EZ Power HD Video Port on the HD-19 camera extends power and video up to 100’ (30.5 m). Power is fed to the camera and HSDS video is returned on the Cat-5e.
ClearVIEW HD-19 First Time Set-up with the HD-19: The ClearVIEW HD-19 was designed to be exceptionally easy to use and operate. There is documentation at the back of the manual for pin-outs for all of the connectors on the ClearVIEW HD-19 camera. Step 1: Using the HD Video Select Rotary Switch and Camera Settings Dip Switch on the back of the camera, set up the camera’s output resolution and functional preferences. There is a label on the bottom of the camera that identifies the choices.
ClearVIEW HD-19 Basic Wiring Configuration of the WallVIEW HD-19 to a Vaddio Joystick Controller Rear Panel HD-19 YPbPr & Power on one (1) Cat-5e up to 100’ (30.5m) ← YPbPr (HSDS differential) Power → RS-232 Cat-5e Rear Panel Quick-Connect SR Interface (Equipment Head-end) YPbPr HD Monitor 24VDC, 2.0 A PowerRite Power Supply (Really Simulated Feed) ProductionVIEW Precision Camera Controller ClearVIEW HD-19 Manual 342-0266 Rev.
ClearVIEW HD-19 Videoconferencing System Configuration: Includes the HD-19, Quick Connect SR Interface with the IR forwarding feature allowing communication to the Polycom® HDX codec with HD-19 as the main camera. HD-19 Camera with IR Forwarding on - used as Main Camera for HDX Codec IR Remote for HDX Codec YPbPr & Power on one (1) Cat-5e up to 100’ (30.5m) ← YPbPr (HSDS differential) Power RS-232 and IR Return One (1) Cat-5e Cable → Two (2) Cat-5e Cables up to 100’ (30.
ClearVIEW HD-19 Mounting and Installation Instructions for the CONCEAL Wall Mounting System: Step 1: Determine Camera Mount Location: When locating the camera, consider viewing angles, lighting conditions, possible line of site obstructions and check for in-wall obstructions where the camera is to be mounted. Pick a mounting location to optimize the performance of the camera.
ClearVIEW HD-19 Step 4: Install the CONCEAL Lower Cover Plate: Attach lower CONCEAL Lower Cover Plate (see Fig. 3). Slide lower cover plate from front of the mounting bracket toward the rear of the bracket. The two-rear locking tabs will need to be guided into position first and will lock in place as the lower cover plate is pushed toward the rear of the mounting bracket and the front tabs are inserted (see Fig. 4). Fig. 3: CONCEAL Lower Cover Plate with Locking Tabs Fig.
ClearVIEW HD-19 General Specifications: WallVIEW HD-19 High Definition PTZ Camera System Part Numbers WallVIEW HD-19 North America 999-6945-000 (Black), 999-6945-000AW (Arctic White) WallVIEW HD-19 International 999-6945-001(Black), 999-6945-001AW (Arctic White) Image Sensor 1/3-Type Exmor High-speed, Progressive Scan CMOS Sensor with 1.3 Megapixels Video Output Resolutions HD: 1080p/60/59.94/50/30/25, 1080i/59.94/50, 720p/59.
ClearVIEW HD-19 Compliance and CE Declaration of Conformity - ClearVIEW HD-19 Compliance testing was performed to the following regulations: FCC Part 15, Subpart B ICES-003, Issue 4: 2004 EN 55022 A: 2006 + A1: 2007(CISPR 22:2005/A1:2005) AS/NZS CISPR 22: 2009 + A1: 2010 VCCI V-3/2010.
ClearVIEW HD-19 Warranty Information: (See Vaddio Warranty, Service and Return Policies posted on vaddio.com for complete details): Hardware* Warranty: One year limited warranty on all parts. Vaddio warrants this product against defects in materials and workmanship for a period of one year from the day of purchase from Vaddio. If Vaddio receives notice of such defects during the warranty period, they will, at their option, repair or replace products that prove to be defective.
ClearVIEW HD-19 Appendix 1: YPbPr Video Pin-Out for the HD-19 Camera and Quick-Connect SR Interface Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 YPbPr Pr Y Pb Pr GND Y GND Pb GND - EZCamera Power & HD Video RJ-45 Connector Pin-outs The EZCamera Power and HD Video RJ-45 Connector is for use with either the Quick-Connect SR Interface or the Quick-Connect DVI/HDMI SR Interface ONLY (568B Wiring Standard). The video signals are differential (HSDS™) and can only be received by the interfaces above.
ClearVIEW HD-19 Appendix 2: ClearVIEW HD-19 Dimensions ClearVIEW HD-19 Manual 342-0266 Rev.
ClearVIEW HD-19 Appendix 3: Communication Specification Communication Speed: 9600 bps (default) Start bit: 1 Stop bit: 1 Data bits: 8 Parity: None No Flow control 12345678 Pin # 1) 2) 3) 4) 5) 6) 7) 8) RJ-45 RS-232 and IR Out Pins Unused Unused Unused IR Output (Diff Signal to Quick-Connect SR) IR Ground (Diff Signal to Quick-Connect SR) GND (GND of IR Short Range - Pin 3) RXD (from TXD of control source) TXD (to RXD of control source) NOTE: The Vaddio ClearVIEW HD-19 Control Protocol is similar, but n
ClearVIEW HD-19 HD-19 Command List (2/2) Command Set CAM_Backlight CAM_Aperture CAM_Memory CAM_IDWrite IR_Receive Pan-tiltDrive Tally Preset Pan Speed Motor Config BLK.Enhance GMA.Enhance CRM.Enhance KNE.Enhance DIS.Enhance SNR.Enhance AGC.
ClearVIEW HD-19 HD-19 Inquiry List (1/1) Inquiry Command CAM_PowerInq Command 8x 09 04 00 FF CAM_ZoomPosInq CAM_FocusPosInq CAM_WBModeInq 8x 09 04 47 FF 8x 09 04 48 FF 81 09 04 35 FF CAM_RGain CAM_BGain CAM_Iris CAM_Gain CAM_Bright CAM_BacklightModeInq 8x 09 04 43 FF 8x 09 04 44 FF 8x 09 04 4B FF 8x 09 04 4C FF 8x 01 04 4D FF 8x 09 04 33 FF CAM_ApertureInq CAM_MemoryInq CAM_IDInq CAM_ReceiveInq 8x 09 04 42 FF 8x 09 04 3F FF 8x 09 04 3F FF 8x 09 06 08 FF Pan-TiltMaxSpeedInq 8x 09 06 11 FF Response
ClearVIEW HD-19 Appendix 3 (continued): Iris Position: Index 0x11 0x10 0x0F 0x0E 0x0D 0x0C 0x0B 0x0A 0x09 0x08 0x07 0x06 0x05 0x04 0x03 0x02 0x01 0x00 Gamma Position: Index 0x10 0xF 0xE 0xD 0xC 0xB 0xA 0x9 0x8 0x7 0x6 0x5 0x4 0x3 0x2 0x1 0x0 F-Stop (Iris Position) F1.6 F2.0 F2.4 F2.8 F3.4 F4.0 F4.8 F5.6 F6.8 F8.0 F9.6 F11.0 F14.0 F16.0 F19.0 F22.0 F28.0 Close Gamma value 1.00 0.95 0.90 0.85 0.80 0.75 0.70 0.65 0.60 0.55 0.50 0.45 0.40 0.35 (Default) 0.30 0.25 0.20 ClearVIEW HD-19 Manual 342-0266 Rev.
ClearVIEW HD-19 Appendix 3 (continued): Shutter Position (Speed): Index Shutter (Speed) 0x23 1/30000 0x22 1/10000 0x21 1/5000 0x20 1/2500 0x1F 1/1500 0x1E 1/1000 0x1D 1/700 0x1C 1/600 0x1B 1/500 0x1A 1/480 0x19 1/360 0x18 1/300 0x17 1/250 0x16 1/240 0x15 1/200 0x14 1/180 0x13 1/150 0x12 1/120 0x11 1/100 0x10 1/60 0x0F 1/50 0x0E 1/30 0x0D x2 0x0C x4 0x0B x6 0x0A x8 0x09 x10 0x08 x12 0x07 x14 0x06 x16 0x05 x20 0x04 x24 0x03 x32 0x02 x40 0x01 x48 0x00 x60 ClearVIEW HD-19 Manual 342-0266 Rev.
ClearVIEW HD-19 NOTES: ClearVIEW HD-19 Manual 342-0266 Rev.
ClearVIEW HD-19 Inside Back Cover - Blank ClearVIEW HD-19 Manual 342-0266 Rev.
ClearVIEW HD-19 9433 Science Center Drive, Minneapolis, MN 55428 Toll Free: 800-572-2011 ▪ Phone: 763-971-4400 ▪ FAX: 763-971-4464 www.vaddio.com ©2012 Vaddio - All Rights Reserved. Reproduction in whole or in part without written permission is prohibited. Specifications and pricing are subject to change without notice. Vaddio, ProductionVIEW, ClearVIEW, Quick-Connect, EZCamera, AutoPresenter, HSDS and PowerRite are registered trademarks of Vaddio.
