Installation and User Guide VADDIO™ WALLVIEW™ HD-20 SYSTEM High Definition PTZ Camera Featuring the Quick-Connect™ SR Interface and the CONCEAL™ Wall Mounting System Model Number 999-6955-000 (North America) Model Number 999-6955-001 (International) Quick-Connect SR Interface PN: 998-1105-016 ©2012 Vaddio - All Rights Reserved ● WallVIEW HD-20 Document Number 324-0179 Rev.
WallVIEW HD-20 WallVIEW HD-20 Overview: The WallVIEW HD-20 HD PTZ camera with Vaddio’s EZCamera™ Cat-5e cabling system using HSDS™, Vaddio delivers a system that allows for easy installation and integration of camera systems. The HD-20 camera is built around a 6.49mm diagonal (1/2.8 Type) high-speed CMOS image sensor with a total of 3.27M pixels and a 20x optical zoom lens, making it the ideal choice for a wide range of high definition video applications.
WallVIEW HD-20 UNPACKING: Carefully remove the device and all of the parts from the packaging. Unpack and identify the following parts for 999-6955-000: One (1) ClearVIEW HD-20 HD Camera One (1) Vaddio IR Remote Commander One (1) Quick-Connect SR Interface One (1) Vaddio PowerRite™ 24 VDC, 2.
WallVIEW HD-20 ClearVIEW HD-20 PTZ Camera, Rear View with Feature Call-outs: ⑤ ⑥ ⑦ ⑨ ⑩ ⑪ ⑧ ⑫ 5) RS-232 IN & IR Out: The RS-232 accepts modified VISCA protocol for camera control, as well as transmits IR signaling received by the IR receivers, which can be transmitted to third party devices. 6) Dip Switch Settings: Settings for IR remote, baud rate, SD output format, and image flip can be configured on these switches. See page 5 for additional information on switch settings.
WallVIEW HD-20 Quick-Connect SR Interface Rear Panel with Feature Call-outs: ① ② ③ ④ ⑤ 1) Power Input: 5.5mm OD x 2.5mm ID coaxial connector for the provided PowerRite 24 VDC, 2.0 Amp power supply. 2) EZCamera Power & HD Video: A single Cat-5e connection between the EZCamera Power & HD Video RJ-45 connector and the EZ Power HD Video Port on the HD-20 camera extends power and video up to 100’ (30.5 m). Power is fed to the camera and HSDS video is returned on the Cat-5e.
WallVIEW HD-20 Videoconference Codecs and RS-232: Depending on the codec and RS-232 port used, special DB-9 to RJ-45 adapters may sometimes be required. Refer to Vaddio’s price list or website for Tech Notes on the WallVIEW HD-20 page on specific diagrams for wiring the camera to videoconference codecs. Any special adapters and configuration information will be noted.
WallVIEW HD-20 Basic Wiring Configuration of the WallVIEW HD-20 to a Vaddio Joystick Controller Rear Panel HD-20 YPbPr & Power on one (1) Cat-5e up to 100’ (30.5m) ← YPbPr (HSDS differential) Power → RS-232 Cat-5e Rear Panel Quick-Connect SR Interface (Equipment Head-end) YPbPr HD Monitor 24VDC, 2.
WallVIEW HD-20 If the bracket is to be mounted on a 2-gang wall box, use the screws supplied with the wall box cover plate to attach the CONCEAL Wall Mount Bracket. If mounting to drywall with wall anchors, use the four (4) quality wall anchors/screws provided (see Fig. 1). Note: The mounting holes are slotted and are 90° opposing to provide easy leveling. Level the mount and tighten the mounting screws. Fig. 1: CONCEAL Wall Mount Bracket: Cabled and Attached to Wall Fig.
WallVIEW HD-20 NOTE (One more time!): Check all Cat-5e cables for continuity in advance of the final connection. Label the Cat-5e cables. Plugging the EZ POWER HD VIDEO cable into the wrong RJ-45 may cause damage to the camera system and void the warranty. Step 7: Connect the Vaddio 24 VDC power supply to an AC outlet. Power will travel down the Power/Video Cat. 5 cable to the camera.
WallVIEW HD-20 Compliance and CE Declaration of Conformity Compliance testing was performed to the following regulations: FCC Part 15, Subpart B ICES-003, Issue 4: 2004 EN 55022 A: 2006 + A1: 2007(CISPR 22:2005/A1:2005) AS/NZS CISPR 22: 2009 VCCI V-3/2010.
WallVIEW HD-20 Warranty Information (See Vaddio’s Warranty Policies posted on vaddio.com for complete details): Hardware* Warranty: One year limited warranty on all parts. Vaddio warrants this product against defects in materials and workmanship for a period of one year from the day of purchase from Vaddio. If Vaddio receives notice of such defects during the warranty period, they will, at their option, repair or replace products that prove to be defective.
WallVIEW HD-20 Appendix 1: YPbPr Video Pin-Out for the HD-20 Camera and Quick-Connect SR Interface Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 YPbPr Pr Y Pb Pr GND Y GND Pb GND - EZCamera Power & HD Video RJ-45 Connector Pin-outs The video signals are differential (HSDS) and can only be transmitted by the HD-20 and received by the Quick-Connect SR Interface Pin 1 2 3 4 5 6 7 8 Power & YPbPr Power+ PowerY+ PB+ PB GND Y GND PR+ PR- 12345678 Appendix 2: ClearVIEW HD-20 Dimensions WallVIEW HD-20 Manual 34
WallVIEW HD-20 Appendix 3: Communication Specification Communication Speed: 9600 bps (default) Start bit: 1 Stop bit: 1 Data bits: 8 Parity: None No Flow control 12345678 Pin # 1) 2) 3) 4) 5) 6) 7) 8) RJ-45 RS-232 and IR Out Pins Unused Unused Unused IR Output (Diff Signal to Quick-Connect SR) IR Ground (Diff Signal to Quick-Connect SR) GND (GND of IR Short Range - Pin 3) RXD (from TXD of control source) TXD (to RXD of control source) NOTE: The Vaddio ClearVIEW HD-20 Control Protocol is similar, but no
WallVIEW HD-20 HD-20 Command List (2/2) Command Set V Command Command Packet CAM_Backlight Y Y Y Y Y Y Y Y Y Y Y Y Y N+ N+ Y Y Y Y Y Y Y Y Y Y On Off Reset Up Down Direct Reset Set Recall 81 01 04 33 02 FF 81 01 04 33 03 FF 81 01 04 02 00 FF 81 01 04 02 02 FF 81 01 04 02 03 FF 81 01 04 42 00 00 0p 0q FF 81 01 04 3F 00 0p FF 81 01 04 3F 01 0p FF 81 01 04 3F 02 0p FF 81 01 04 22 0p 0q 0r 0s FF 81 01 06 08 02 FF 81 01 06 08 03 FF 81 01 06 08 10 FF 81 01 7D 01 03 00 00 FF 81 01 7D 01 13 00 00 FF 81 01 0
WallVIEW HD-20 HD-20 Inquiry List (1/1) Inquiry Command V Command Command Packet Comments CAM_PowerInq Y 81 09 04 00 FF CAM_ZoomPosInq CAM_WBModeInq Y Y 81 09 04 47 FF 81 09 04 35 FF CAM_RGain CAM_BGain CAM_AEModeInq Y Y Y 81 09 04 43 FF 81 09 04 44 FF 81 09 04 39 FF CAM_Iris CAM_Gain CAM_BacklightModeInq Y Y Y 81 09 04 4B FF 81 09 04 4C FF 81 09 04 33 FF CAM_FocusPosInq CAM_ApertureInq CAM_MemoryInq CAM_IDInq CAM_ReceiveInq Y Y Y Y Y 81 09 04 48 FF 81 09 04 42 FF 81 09 04 3F FF 81 09 04
WallVIEW HD-20 9433 Science Center Drive, Minneapolis, MN 55428 Toll Free: 800-572-2011 ▪ Phone: 763-971-4400 ▪ FAX: 763-971-4464 www.vaddio.com ©2012 Vaddio - All Rights Reserved. Reproduction in whole or in part without written permission is prohibited. Specifications and pricing are subject to change without notice. Vaddio, ClearVIEW, ProductionVIEW, Quick-Connect, AutoPresenter, WallVIEW, EZCamera, HSDS and PowerRite are registered trademarks of Vaddio. AllRev.
