Installation and User Guide VADDIO™ WALLVIEW™ HD-20 DVI/HDMI High Definition Robotic PTZ Camera Featuring the Quick-Connect™ DVI/HDMI SR Interface and the CONCEAL™ Wall Mounting System Model Number 999-6956-000 (North America) Model Number 999-6956-001 (International) Quick-Connect DVI/HDMI SR Interface PN: 998-1105-018 ©2012 Vaddio - All Rights Reserved ● WallVIEW DVI/HDMI HD-20 ● Document Number 342-0180 Rev.
WallVIEW DVI/HDMI HD-20 Inside Front Cover - Blank WallVIEW DVI/HDMI HD-20 Manual 342-0180 Rev.
WallVIEW DVI/HDMI HD-20 WallVIEW DVI/HDMI HD-20 Overview: The WallVIEW HD-20 HD PTZ camera and Quick-Connect DVI/HDMI EZCamera™ Cat-5e cabling system using HSDS™, delivers a system that allows for easy installation and integration of a camera system capable of simultaneous HD analog YPbPr and digital (DVI-D or HDMI with adapter cable). The HD-20 camera is built around a 6.49mm diagonal (1/2.8 Type) high-speed CMOS image sensor with a total of 3.
WallVIEW DVI/HDMI HD-20 UNPACKING: Carefully remove the device and all of the parts from the packaging.
WallVIEW DVI/HDMI HD-20 ClearVIEW HD-20 PTZ Camera, Rear View with Feature Call-outs: ⑤ ⑥ ⑦ ⑨ ⑩ ⑪ ⑧ ⑫ 5) RS-232 IN & IR Out: The RS-232 accepts modified VISCA protocol for camera control, as well as transmits IR signaling received by the IR receivers, which can be transmitted to third party devices. 6) Dip Switch Settings: Settings for IR remote, baud rate, SD output format, and image flip can be configured on these switches. See page 6 for additional information on switch settings.
WallVIEW DVI/HDMI HD-20 Quick-Connect DVI/HDMI - SR Interface I/O Description ①② ③④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ 1) Blue LED Power Indicator. 2) 24 VDC Power Port: Coax Power Connector, 5.5mm OD x 2.5mm ID, Positive Center. 3) Recessed Color Space Conversion Switch: Toggles between HDMI YCbCr and sRGB (RGBHV) color space. Change the color space to accommodate either YCbCr or RGBHV monitors. 4) RS-232 Control Input (from joystick controller, codec or control system).
WallVIEW DVI/HDMI HD-20 First Things, First… Using the HD Video Select Rotary Switch and Camera Settings Dip Switch on the back of the camera, set up the camera’s output resolution and functional preferences. There is a label on the bottom of the camera that identifies the choices.
WallVIEW DVI/HDMI HD-20 System Connectivity Example 1: Basic system connectivity of a Vaddio WallVIEW™ DVI/HDMI HD-20 and Quick-Connect DVI/HDMI SR Interface with Vaddio ProductionVIEW™ Precision Camera Controller and PreVIEW HD Monitors. WallVIEW DVI/HDMI HD-20 System Power to Camera HSDS Video from Camera - Cat-5e Two (2) - Cat-5e Cables Up to 100’ (30.48m) Quick-Connect DVI/HDMI SR Interface RS-232 Control - Cat-5e YPbPr RS-232 on Cat-5e Vaddio PreVIEW™ HD 7.
WallVIEW DVI/HDMI HD-20 System Connectivity Example 2: System connectivity of two (2) Vaddio HD-20 cameras and two (2) QuickConnect DVI/HDMI SR Interfaces configured with single control port codec and Daisy Chain Control Emulation (DCCE). Vaddio HD-20 HD Camera Systems Power to Camera HD Video from Camera - Cat-5e Codec IR Remote: Forwarded through Main Camera for Codec Control Power to Camera HD Video from Camera - Cat-5e Two (2) - Cat-5e Cables - up to 100’ (30.
WallVIEW DVI/HDMI HD-20 If the bracket is to be mounted on a 2-gang wall box, use the screws supplied with the wall box cover plate to attach the CONCEAL Wall Mount Bracket. If mounting to drywall with wall anchors, use the four (4) quality wall anchors/screws provided (see Fig. 1). Note: The mounting holes are slotted and are 90° opposing to provide easy leveling. Level the mount and tighten the mounting screws. Note: Check all Cat-5e cables for continuity in advance of final connection.
WallVIEW DVI/HDMI HD-20 Step 8: Connect the HD Video Outputs (DVI or HDMI with adapter cable - or - analog HD YPbPr video) into a display device or video console. Please make sure that the video console or the display device is set up to receive the HD camera resolution that was chosen with the rotary switch on page 6. Most monitors are automatic, however all consoles will need set-up prior to termination. Step 9: Connect the Vaddio 24 VDC, 2.
WallVIEW DVI/HDMI HD-20 General Specifications: WallVIEW DVI/HDMI HD-20 Part Numbers WallVIEW DVI/HDMI HD-20 999-6956-000 (North America) WallVIEW DVI/HDMI HD-20 999-6956-001 (International) Vaddio ClearVIEW HD-20 Image Device 6.49mm diagonal (1/2.8 Type) Exmor High-speed CMOS Image Sensor Picture Elements 3.27M pixels (Effective) 1080i/59.94/60, 1080/50i, 720p/59.
WallVIEW DVI/HDMI HD-20 Compliance and CE Declaration of Conformity - HD-20 PTZ Camera Compliance testing was performed to the following regulations: FCC Part 15, Subpart B ICES-003, Issue 4: 2004 European Standard EN 55022 A: 2006 + A1: 2007(CISPR 22:2005/A1:2005) AS/NZS CISPR 22: 2009 VCCI V-3/2010.
WallVIEW DVI/HDMI HD-20 Compliance and CE Declaration of Conformity - Quick-Connect DVI/HDMI SR Interface Compliance testing was performed to the following regulations: FCC Part 15, Subpart B ICES-003, Issue 4: 2004 European Standard EN 55022 A: 2006 + A1: 2007(CISPR 22:2005/A1:2005) EMC Directive 2004/108/EC Class A Class A Class A Class A FCC Part 15 Compliance This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15, Subpart B, of
WallVIEW DVI/HDMI HD-20 WARRANTY INFORMATION (See Vaddio Warranty Policies posted on vaddio.com for complete details): Hardware* Warranty: One year limited warranty on all parts. Vaddio warrants this product against defects in materials and workmanship for a period of one year from the day of purchase from Vaddio. If Vaddio receives notice of such defects during the warranty period, they will, at their option, repair or replace products that prove to be defective.
WallVIEW DVI/HDMI HD-20 Appendix 1: YPbPr Video Pin-Out for the HD-20 Camera & Quick-Connect Analog YPbPr Output Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 YPbPr Pr Y Pb Pr GND Y GND Pb GND - EZCamera Power & HD Video RJ-45 Connector Pin-outs The video signals are differential (HSDS) and can only be transmitted by the HD-20 and received by the QuickConnect SR Interface Pin 1 2 3 4 5 6 7 8 YPbPr Power+ PowerY+ PB+ PB GND Y GND PR+ PR- 12345678 Appendix 2: ClearVIEW HD-20 Dimensions WallVIEW DVI/HDMI HD-2
WallVIEW DVI/HDMI HD-20 Appendix 3: Communication Specification Communication Speed: 9600 bps (default) Start bit: 1 Stop bit: 1 Data bits: 8 Parity: None No Flow control 12345678 Pin # 1) 2) 3) 4) 5) 6) 7) 8) RJ-45 RS-232 and IR Out Pins Unused Unused Unused IR Output (Diff Signal to Quick-Connect) IR Ground (Diff Signal to Quick-Connect) GND (GND of IR Short Range - Pin 3) RXD (from TXD of control source) TXD (to RXD of control source) NOTE: The Vaddio ClearVIEW HD-20 Control Protocol is similar, but
WallVIEW DVI/HDMI HD-20 HD-20 Command List (2/2) Command Set V Command Command Packet CAM_Backlight Y Y Y Y Y Y Y Y Y Y Y Y Y N+ N+ Y Y Y Y Y Y Y Y Y Y On Off Reset Up Down Direct Reset Set Recall 81 01 04 33 02 FF 81 01 04 33 03 FF 81 01 04 02 00 FF 81 01 04 02 02 FF 81 01 04 02 03 FF 81 01 04 42 00 00 0p 0q FF 81 01 04 3F 00 0p FF 81 01 04 3F 01 0p FF 81 01 04 3F 02 0p FF 81 01 04 22 0p 0q 0r 0s FF 81 01 06 08 02 FF 81 01 06 08 03 FF 81 01 06 08 10 FF 81 01 7D 01 03 00 00 FF 81 01 7D 01 13 00 00 F
WallVIEW DVI/HDMI HD-20 HD-20 Inquiry List (1/1) Inquiry Command V Command Command Packet Comments CAM_PowerInq Y 81 09 04 00 FF CAM_ZoomPosInq CAM_WBModeInq Y Y 81 09 04 47 FF 81 09 04 35 FF CAM_RGain CAM_BGain CAM_AEModeInq Y Y Y 81 09 04 43 FF 81 09 04 44 FF 81 09 04 39 FF CAM_Iris CAM_Gain CAM_BacklightModeInq Y Y Y 81 09 04 4B FF 81 09 04 4C FF 81 09 04 33 FF CAM_FocusPosInq CAM_ApertureInq CAM_MemoryInq CAM_IDInq CAM_ReceiveInq Y Y Y Y Y 81 09 04 48 FF 81 09 04 42 FF 81 09 04 3F FF
WallVIEW DVI/HDMI HD-20 9433 Science Center Drive, Minneapolis, MN 55428 Toll Free: 800-572-2011 ▪ Phone: 763-971-4400 ▪ FAX: 763-971-4464 www.vaddio.com ©2012 Vaddio - All Rights Reserved. Reproduction in whole or in part without written permission is prohibited. Specifications and pricing are subject to change without notice. Vaddio, ClearVIEW, ProductionVIEW, Quick-Connect, AutoPresenter, DCCE, WallVIEW, EZCamera, HSDS and PowerRite are registered trademarks of Vaddio.
