Installation and User Guide VADDIO™ WIDESHOT™ WALLVIEW™ MINI Wide Angle HD Point of View Camera System with a 82.2° Horizontal Field of View and the Quick-Connect™ USB Mini Interface Model Number 999-6911-100 (North America) Model Number 999-6911-101 (International) WideSHOT WallVIEW Mini, Document Number 342-0710 Rev.
WideSHOT WallVIEW Mini Inside Front Cover - Blank WideSHOT WallVIEW Mini, Document Number 342-0710 Rev B Page 2 of 32
WideSHOT WallVIEW Mini TABLE OF CONTENTS Overview ................................................................................................................................................................................................................. 4 Unpacking ...............................................................................................................................................................................................................
WideSHOT WallVIEW Mini OVERVIEW The Vaddio WideSHOT HD camera wide angle, manual lens camera produces astounding results for small and huddle room applications where the distance between the camera and the subject is limited. The WideSHOT camera is a low cost, high value, manual pan/tilt/zoom camera with a super wide angle lens that can be set to provide the best image possible in a small environment. To that end, the WideSHOT camera sports a lens with 82.
WideSHOT WallVIEW Mini UNPACKING Carefully remove the product and all of the included parts from the packaging. Identify the following parts for each camera: WideSHOT WallVIEW USB Camera System (North America) Part Number: 999-6911-100 One (1) WideSHOT HD Wide-Angle Camera (998-6918-000) One (1) Vaddio IR SHOT Commander Remote with One-sheet Guide One (1) Quick-Connect USB Mini Interface (998-1105-039) One (1) 6’ (1.83m) USB 2.0 Type-A Male to Type-B Male Cable (Black) One (1) 24 VDC, 2.
WideSHOT WallVIEW Mini Setting the WideSHOT Lens Image: WideSHOT Focus Knob Removal You may ask, “Why would anyone want to remove the focus knob?” The answer is directly correlated with the quality of this wide-angle HD lens. It is not a plastic “webcam”, but instead it is an exceptional quality glass lens, rated up to 3-megapixel with a 3.3mm to 10.5mm precision varifocal optical zoom lens with manual iris, focus and zoom controls.
WideSHOT WallVIEW Mini Rear Panel Connections with Feature Call-outs Image: WideSHOT HD Camera Rear View ② ① ④ ③ 1) RS-232 & IR Out: The RS-232 accepts modified VISCA protocol for camera control, as well as transmits IR signaling received by the front IR receiver, which can be transmitted to third party devices. The WideSHOT will not react to the remote if the IR is off. IR forwarding is only available in the SR Quick-Connect models.
WideSHOT WallVIEW Mini IR SHOT COMMANDER REMOTE: The Vaddio IR SHOT Commander, designed to work with the Vaddio ZoomSHOT and WideSHOT camera systems, is compatible with all the Vaddio PTZ cameras. The Vaddio IR SHOT Commander is compatible with the following Vaddio camera packages: All ZoomSHOT and WideSHOT Camera Systems are shipped with this IR remote.
WideSHOT WallVIEW Mini Table: WideSHOT OSD Menu Structure Use this OSD menu with the IR SHOT Commander Remote to make video adjustments (Picture, COLOR, EXP, etc…) on the WideSHOT Camera.
WideSHOT WallVIEW Mini QUICK-CONNECT USB MINI Image: Front Panel with Feature Call-outs ➋ ➊ 1) USB Port: USB Type-B port for connectivity to streaming or capture computer. 2) Power LED: Indicates presence of 24 VDC power for the Quick-Connect. The USB Mini will automatically show up as a native USB 2.0 device on the connected computer. If not prompted to allow the device as your primary UVC video source, it may be required to configure it as such in the operating system of the streaming/capture computer.
WideSHOT WallVIEW Mini Diagram: Basic System Configuration WideSHOT with USB Mini Local Power Two (2) Cat-5 Cables 24 VDC Distance up to 150’ (15.26m) ◄ HD Video from Camera - Power to Camera ▶ Serial Control (RS-232) WideSHOT HD Camera Quick-Connect USB Mini Rear Panel (above), Front Panel (below) USB 2.0 Connected to Front Panel Laptop with UC Application USB 2.
WideSHOT WallVIEW Mini STEP BY STEP WIDESHOT WALLVIEW MINI INSTALLATION INSTRUCTIONS Step 1: After determining the optimum location of the camera; route, mark and test the two Cat-5 cables from the camera to the USB Mini Interface located at the table. The two Cat-5 cables should feed-through the hole located on the rear flange of the Thin Profile Wall Mount. If the bracket is to be mounted on a 1-gang wall box, use the screws supplied with the wall box cover plate to attach the Thin Profile Wall Mount.
WideSHOT WallVIEW Mini STEP 6: Connect a USB 2.0, Type-A Male to USB Type-B Male cable from the USB Type-B jack of the USB Mini to the USB 2.0 Type-A port on the laptop or PC. STEP 6 USB 2.0 Cable STEP 7: Again, for the best results, set the camera to 720p/59.94 video resolution by turning its rotary resolution switch on the back of the camera to the ‘0’ position (at 6:00) with the notch in the rotary switch pointed straight downward.
WideSHOT WallVIEW Mini FRAMING THE WIDESHOT’S VIDEO SHOT When framing the shot with a WideSHOT Camera, consider and review the following elements: The area should be well lit and without reflective surfaces. For wall surfaces, use a flat paint or wall coverings to minimize audio reflections. Use neutral colors, for example; pale grey, pale blue or colors that are easy for any camera to process.
WideSHOT WallVIEW Mini COMPATIBILITY The Quick-Connect USB will work with the following web browsers, soft codecs, computer operating systems, and media players: Compatibility - Web Browsers: 1) Internet Explorer (IE 8 and above) 2) Safari (Rev 4 and 5) 3) Safari/iOS (Rev 4 and 5) 4) Chrome (the latest and current release - auto updating) 5) Firefox (the latest and current release - auto updating) Soft Client Compatibility: The Quick-Connect USB is compatible with the following soft codecs or applications,
WideSHOT WallVIEW Mini INTERNAL WEB PAGES AND CONTROL The internal web pages will allow control of the Quick-Connect USB and control of the attached camera via a network connection.
WideSHOT WallVIEW Mini Screen Shot: User Menu - Camera Control Page ➊ ➋ 1) CCU Scenes - Custom A, Custom B and Custom C There are 3 preset memory locations for scenes configured and stored on the Camera Settings Menu Tab (see page 20) on the WideSHOT CCU Scenes, under Color Settings. The Admin has control to set up the scenes and the User can recall these presets by clicking on Custom A, B or C.
WideSHOT WallVIEW Mini Screen Shot: Admin Menu - Camera Settings Page (Adjustable in web server mode only) The Camera Settings page provides the parameters to allow the end user to match the camera to the environment, set the CCU presets and make startup assignments. ➊ ➋ ➌ ➍ ➎ 1) Load Preset at Startup: Check this box to move the camera to a predefined preset when the camera powers up. The WideSHOT is a manual camera and will not use this parameter.
WideSHOT WallVIEW Mini Gain: Move adjustment slider as required for amount of Iris Gain desired. Numeric value will be displayed in the box to the right of the slider. Auto White Balance check box: When checked, camera will operate in Auto White Balance Mode, when unchecked, the camera will be in Manual White Balance Mode to allow for adjustment of Red and Blue Gain. Red Gain: Move the adjustment slider as required for amount of Red Gain desired.
WideSHOT WallVIEW Mini Screen Shot: Admin Menu - Room Labels The Room Labels menu allows the administrator to label the company name, room name, room phone and help phone on a per USB Mini basis. The labels appear on every page at the top/middle of the page. Simply enter the room information and click Save. Screen Shot: Admin Menu - Networking Under the Networking menu, the Network Configuration page displays the Hostname of the device. The USB Mini uses Ethernet over the USB port.
WideSHOT WallVIEW Mini Screen Shot: Admin Menu - Security The Security menu allows the Admin to UPDATE “user” PASSWORD and UPDATE “admin” PASSWORD. The default “user” password is: password. The default “admin” password is also: password. The Network administrator can reassign the user name and password as well as the admin password. There is only one “user” password and one “admin” password at any given time. If changes are made, click on Save to store the change.
WideSHOT WallVIEW Mini Screen Shot: Admin Menu - System Menu The System Menu is where the Firmware Updates are performed. There will be firmware updates and upgrades over the life of the Quick-Connect. The file for the firmware update is chosen in this menu and the update is started here too. Screen Shot: Admin Menu - Update Confirmation After clicking on “Begin Firmware Update…” a confirmation pop-up and warning will be displayed.
WideSHOT WallVIEW Mini Screen Shot: Admin Menu - Update in Progress After the firmware load has been started, a pop-up screen will advise patience and notify, in terms of a percentage completed, the progress of the firmware update load. Again, please don’t interrupt the firmware load. Screen Shot: Admin Menu - Help Service/Help information can be found under the Help menu. Support phone numbers and e-mail, manuals, FAQ’s and System information is listed on this page.
WideSHOT WallVIEW Mini CONNECTING THE USB MINI AND WIDESHOT TO THE PC AND PROGRAM OF CHOICE The Quick-Connect USB and attached camera are compatible with many programs and media players. The following is an attempt to generally describe the steps to plug in the QC-USB with a Vaddio camera and get an image in a couple of popular programs. Skype Example: 1) After connecting a camera to the Quick-Connect USB, with a quality USB 2.
WideSHOT WallVIEW Mini GENERAL SPECIFICATIONS WideSHOT WallVIEW USB Part Numbers WideSHOT WallVIEW Mini System 999-6911-100 (North America) WideSHOT WallVIEW Mini System 999-6911-101 (International) WideSHOT Camera Image Sensor 1/3-Type Progressive Scan CMOS Sensor with 1.3 Megapixels (720p native) Video Output Resolutions HD: 1080/59.94/50/30/25, 1080i/59.94/50, 720p/59.94/50 SD: 480p/59.94 & 576p/50 Approx. 3X Optical Zoom, 3.3mm to 10.5mm manual focus 82.2° Wide End to 3.2° Tele End, 27.
WideSHOT WallVIEW Mini COMPLIANCE AND CE DECLARATION OF CONFORMITY FOR WIDESHOT Compliance testing was performed to the following regulations: FCC Part 15 (15.107, 15.
WideSHOT WallVIEW Mini COMPLIANCE AND CE DECLARATION OF CONFORMITY FOR USB MINI Compliance testing was performed to the following regulations: FCC Part15, Sections 15.107, 15.
WideSHOT WallVIEW Mini WARRANTY INFORMATION (See Vaddio Warranty, Service and Return Policies posted on vaddio.com for complete details): Hardware* Warranty: Two (2) year limited warranty on all parts and labor for Vaddio manufactured products. Vaddio warrants its manufactured products against defects in materials and workmanship for a period of two years from the day of purchase, to the original purchaser, if Vaddio receives notice of such defects during the warranty.
WideSHOT WallVIEW Mini APPENDIX 1: PIN-OUTS FOR EZ-POWER VIDEO CAMERAS AND USB MINI Table: EZ-POWER VIDEO RJ-45 Connector Pin-outs Pin Pin - 1 Pin - 2 Pin - 3 Pin - 4 Pin - 5 Pin - 6 Pin - 7 Pin - 8 Signal Power+ PowerY+ PB+ PB YPR+ PR- EZ-POWER VIDEO 12345678 Differential Video Signals Important Note: The EZ-POWER VIDEO RJ-45 connector on the WideSHOT camera is for use with the Quick-Connect SR, Quick-Connect DVI/HDMI SR, Quick-Connect USB and QuickConnect USB Mini Interfaces ONLY (568B Wiring Standa
WideSHOT WallVIEW Mini WIDESHOT OSD MENU TREE Main Menu Picture > Color > Exposure > Special> Controls Brightness Contrast Sharpness Range 0 - 16 0 - 16 0 - 16 Default 8 8 8 Black Level NR 0 - 16 0 - 16 8 0 Return Red Gain Green Gain 0 - 16 0 - 16 8 8 0 - 16 0 - 16 8 12 0 - 16 Low/Auto/High 8 Auto Off/On Off NTSC Date Code - Blue Gain Saturation Return Shutter AGC Return Title NTSC/PAL Defaults Reset Version Return Exit Notes Brightness Contrast Detail (set Sharpness down to 3-4 to e
WideSHOT WallVIEW Mini Inside Rear Cover - Mostly Blank WideSHOT WallVIEW Mini, Document Number 342-0710 Rev B Page 31 of 32
WideSHOT WallVIEW Mini ‘ Toll Free: 800-572-2011 ▪ Phone: 763-971-4400 ▪ FAX: 763-971-4464 www.vaddio.com ©2014 Vaddio - All Rights Reserved. Reproduction in whole or in part without written permission is prohibited. Specifications and pricing are subject to change without notice or obligation. Vaddio, WideSHOT, ZoomSHOT, WallVIEW, EZCamera, EZIM, Quick-Connect and HSDS are trademarks of Vaddio. All otherWideSHOT trademarksWallVIEW are property of their respective owners.