Installation and User Guide VADDIO™ WIDESHOT™ WALLVIEW™ SR Wide Angle HD Point of View Camera System with a 82.2° Horizontal Field of View Manual Lens and the Quick-Connect™ SR Interface Model Number 999-6910-000 (North America) Model Number 999-6910-001 (International) © 2014 Vaddio - All Rights Reserved.
WideSHOT WallVIEW SR Inside Front Cover - Blank WideSHOT WallVIEW SR System Document Number 342-0695 Rev B Page 2 of 20
WideSHOT WallVIEW SR TABLE OF CONTENTS Overview .................................................................................................................................................................... 4 Unpacking: ................................................................................................................................................................. 5 Front View with Feature Call-outs .......................................................................................
WideSHOT WallVIEW SR OVERVIEW: The Vaddio WideSHOT HD camera wide angle, manual lens camera produces amazing results for small and huddle room applications where the distance between the camera and the subject is limited. The WideSHOT camera was designed as a low cost, high value, manual pan/tilt camera with a super wide-angle lens that can be set to provide the best image possible in a small environment. To that end, the WideSHOT camera sports a lens with 82.
WideSHOT WallVIEW SR UNPACKING: Carefully remove the product and all of the included parts from the packaging. Identify the following parts for each camera: WideSHOT WallVIEW SR Camera System (North America): Part Number: 999-6910-000 One (1) WideSHOT HD Wide-Angle Camera (998-6918-000) One (1) Vaddio IR SHOT Commander Remote One (1) Quick-Connect SR Interface One (1) 3-Position Phoenix-type Connector for IR Forwarding One (1) 24 VDC, 2.
WideSHOT WallVIEW SR Setting the WideSHOT Lens Image: WideSHOT Focus Knob Removal You may ask, “Why would anyone want to remove the focus knob?” The answer is directly correlated with the quality of this wide-angle HD lens. It is not a plastic “webcam”, but instead it is an exceptional quality glass lens, rated up to 3-megapixel with a 3.3mm to 10.5mm precision varifocal optical zoom lens with manual iris and manual focus controls.
WideSHOT WallVIEW SR Rear Panel Connections with Feature Call-outs Image: WideSHOT HD Camera ② ① ④ ③ 1) RS-232 & IR Out: The RS-232 accepts modified VISCA protocol for camera control, as well as transmits IR signaling received by the front IR receiver, which can be transmitted to third party devices 2) EZ Power/Video Port: This RJ-45 connector is only used with the Quick-Connect SR, Quick-Connect DVI-D/HDMI SR Interface, QuickConnect USB and USB Mini Interfaces to supply power and return HSDS (differe
WideSHOT WallVIEW SR QUICK-CONNECT SR INTERFACE Image: Rear Panel with Feature Call-outs ① ② ③ ④ ⑤ 1) Power Input: 5.5mm OD x 2.5mm ID coaxial connector for the provided PowerRite 24 VDC, 2.0 Amp power supply. 2) EZCamera Power & HD Video: A single Cat-5 connection between the EZCAMERA POWER & HD VIDEO RJ-45 connector and the camera’s EZ Power HD Video Port on the HD-19 camera extends power and video. Power is fed to the camera and HSDS video is returned from the camera on the same Cat-5.
WideSHOT WallVIEW SR Step By Step Installation Instructions: Step 1: After determining the optimum location of the camera, route, mark and test the two Cat-5 cables from the camera to the Quick-Connect SR Interface located at the head-end. The two Cat-5 cables should feed-through the hole located on the rear flange of the supplied Thin Profile Wall Mount. The bracket can be mounted to a 1-gang wall box.
WideSHOT WallVIEW SR FRAMING THE WIDESHOT’S VIDEO SHOT When framing the shot with a WideSHOT Camera, consider and review the following elements: The area should be well lit and without reflective surfaces. For wall surfaces, use a flat paint or wall coverings to minimize audio reflections. Use neutral colors, for example; pale grey, pale blue or beige that are easy for any camera to process.
WideSHOT WallVIEW SR Image: Basic Wiring Configuration WideSHOT Rear View Maximum Cat-5 Cable Distance for the WideSHOT Camera is 150’ (45.72m) IR SHOT Commander Remote for access to OSD RS-232 Cat-5 HSDS (differential) HD Video & 24 VDC Power One (1) Cat-5 Cable ← YPbPr (differential) Power → Rear Panel Quick-Connect SR Interface YPbPr 24VDC, 2.
WideSHOT WallVIEW SR IR SHOT COMMANDER REMOTE CONTROL Spatially Efficient IR Remote Controller for ZoomSHOT and WideSHOT Camera Systems The Vaddio IR SHOT Commander was designed to work with the Vaddio ZoomSHOT and WideSHOT camera systems and is compatible with the PowerVIEW™, ClearVIEW™ cameras and the WallVIEW™ camera system packages.
WideSHOT WallVIEW SR COMPLIANCE AND CE DECLARATION OF CONFORMITY - WIDESHOT Compliance testing was performed to the following regulations: FCC Part 15 (15.107, 15.
WideSHOT WallVIEW SR WARRANTY INFORMATION (See Vaddio Warranty, Service and Return Policies posted on vaddio.com for complete details): Hardware* Warranty: Two (2) year limited warranty on all parts and labor for Vaddio manufactured products. Vaddio warrants its manufactured products against defects in materials and workmanship for a period of two years from the day of purchase, to the original purchaser, if Vaddio receives notice of such defects during the warranty.
WideSHOT WallVIEW SR WideSHOT WallVIEW SR General Specifications: WideSHOT Camera System Part Numbers Image Sensor Video Output Resolutions Lens/ Focal Length Horizontal Viewing Angle Video S/N Ratio Minimum Illumination Serial Control Protocol Manual Pan/Tilt Range Preset Positions Tally Light Camera Connectors HD Video Select Camera Settings Thin Profile Wall Mount User Controls Materials & Weight Dimensions: WideSHOT WallVIEW 999-6910-000 (North America) WideSHOT WallVIEW 999-6910-001 (International)
WideSHOT WallVIEW SR APPENDIX 1: PIN-OUTS FOR WIDESHOT CAMERA Table EZCamera Power & HD Video RJ-45 Connector Pin-outs WideSHOT EZPOWER HD VIDEO PORT Pin YPbPr 1 Power+ 2 Power3 Y+ 4 PB+ 5 PB 6 Y7 PR+ 8 PR- EZ POWER HD VIDEO 12345678 Important Note: The EZ POWER HD VIDEO RJ-45 Connector is for use with the Quick-Connect SR, Quick-Connect DVI/HDMI SR, Quick-Connect USB and USB Mini Interfaces ONLY (568B Wiring Standard).
WideSHOT WallVIEW SR APPENDIX 3: COMMUNICATION SPECIFICATION Communication Speed: 9600 bps (default) Start bit: 1 Stop bit: 1 Data bits: 8 Parity: None No Flow control 12345678 Pin # 1) 2) 3) 4) 5) 6) 7) 8) RJ-45 RS-232 and IR Out Pins Unused Unused Unused IR Output (Diff Signal to Quick-Connect SR) IR Ground (Diff Signal to Quick-Connect SR) GND (GND of IR Short Range - Pin 3) RXD (from TXD of control source) TXD (to RXD of control source) NOTE: The Vaddio WideSHOT Control Protocol is similar, but not
WideSHOT WallVIEW SR WideSHOT Inquiry List Inquiry Command CAM_PowerInq Command 8x 09 04 00 FF CAM_WBModeInq 81 09 04 35 FF CAM_AEModeInq 8x 09 04 39 FF CAM_IDInq CAM_ApertureInq CAM_RGain CAM_BGain CAM_Bright CAM_ShutterPosInq TallyInq 8x 09 04 22 FF 8x 09 04 42 FF 8x 09 04 43 FF 8x 09 04 44 FF 8x 09 04 4D FF 8x 09 04 4A FF 8x 09 7E 01 0A FF BLK.Enhance CRM.Enhance DNR.Enhance AGC.
WideSHOT WallVIEW SR APPENDIX 4: WIDESHOT OSD MENU TREE Main Menu Picture > Color > Exposure > Special> Controls Brightness Contrast Sharpness Range 0 - 16 0 - 16 0 - 16 Default 8 8 8 Black Level NR 0 - 16 0 - 16 8 0 Return Red Gain Green Gain 0 - 16 0 - 16 8 8 0 - 16 0 - 16 8 12 0 - 16 Low/Auto/High 8 Auto Off/On Off NTSC Date Code - Blue Gain Saturation Return Shutter AGC Return Title NTSC/PAL Defaults Reset Version Return Exit Notes Brightness Contrast Detail (set Sharpness down t
WideSHOT WallVIEW SR Toll Free: 800-572-2011 ▪ Phone: 763-971-4400 ▪ FAX: 763-971-4464 www.vaddio.com ©2014 Vaddio - All Rights Reserved. Reproduction in whole or in part without written permission is prohibited. Specifications and pricing are subject to change without notice or obligation. Vaddio, WideSHOT, ZoomSHOT, ProductionVIEW, WallVIEW, EZCamera, Quick-Connect and HSDS are trademarks of Vaddio. All other trademarks are property of their respective owners. Document Number 342-0695 Rev B, SD: 67936.