Installation and User Guide VADDIO™ ZOOMSHOT™ WALLVIEW™ MINI Featuring the ZoomSHOT HD Point of View Camera System with 19X Optical Zoom and the Quick-Connect USB Mini Interface Model Number 999-6919-100 (North America) Model Number 999-6919-101 (International) © 2014 Vaddio - All Rights Reserved.
ZoomSHOT WallVIEW Mini Inside Front Cover - Blank ZoomSHOT WallVIEW Mini System Document Number 342-0668 Rev A Page 2 of 32
ZoomSHOT WallVIEW Mini TABLE OF CONTENTS Overview ................................................................................................................................................................................................................. 4 Unpacking ...............................................................................................................................................................................................................
ZoomSHOT WallVIEW Mini OVERVIEW The Vaddio ZoomSHOT HD camera produces amazing results for small, medium and large room applications. Anywhere that a point-of-view or stationary camera is used alone, or in conjunction with a Vaddio PTZ camera to simplify camera coverage and preset positioning, the ZoomSHOT is the answer. Essentially, the ZoomSHOT is a low cost pan/tilt/zoom camera, where the pan and tilt are adjusted manually.
ZoomSHOT WallVIEW Mini UNPACKING Carefully remove the product and all of the included parts from the packaging.
ZoomSHOT WallVIEW Mini Rear Panel Connections with Feature Call-outs Image: ZoomSHOT HD Camera ② ① ④ ③ 1) RS-232 & IR Out: The RS-232 port accepts serial control protocol for camera control, as well as automatically identifies the camera to the Quick-Connect USB Mini and Quick-Connect USB Interfaces so the correct software is loaded and ready for the ZoomSHOT. IR Out or IR Forwarding is only available in the SR Quick-Connect models.
ZoomSHOT WallVIEW Mini IR SHOT COMMANDER REMOTE The Vaddio IR SHOT Commander was designed to work with the Vaddio ZoomSHOT and WideSHOT camera systems and is compatible with all the Vaddio PTZ cameras. The Vaddio IR SHOT Commander is compatible with the following Vaddio camera packages: All ZoomSHOT and WideSHOT Camera Systems are shipped with this IR remote.
ZoomSHOT WallVIEW Mini Table: ZoomSHOT OSD Menu Structure Use this OSD menu with the IR SHOT Commander Remote to make video adjustments (AWB, COLOR, EXP, etc…) on the ZoomSHOT Camera.
ZoomSHOT WallVIEW Mini ZoomSHOT OSD Menu Structure (continued) Menu SPECIAL Controls DAY/NIGHT DIS COMM ADJUST IMAGE ADJUST> DISPLAY Range/Modes COLOR / B/W / AUTO ON / OFF BAUD RATE UART RETURN< H-REV ON / OFF V-REV ON / OFF SHARPNESS ON/OFF ON> 1-31 RETURN< MONITOR LCD> GAMMA .02 - 1.0 COLOR LEVEL 0-100 RETURN< USER> GAMMA .02 - 1.
ZoomSHOT WallVIEW Mini QUICK-CONNECT USB MINI Image: Front Panel with Feature Call-outs ➋ ➊ 1) USB Port: USB Type-B port for connectivity to streaming or capture computer. 2) Power LED: Indicates presence of 24 VDC power for the Quick-Connect. The USB Mini will automatically show up as a native USB 2.0 device on the connected computer. If not prompted to allow the device as your primary UVC video source, it may be required to configure it as such in the operating system of the streaming/capture computer.
ZoomSHOT WallVIEW Mini Diagram: Basic System Configuration ZoomSHOT with USB Mini Local Power Two (2) Cat-5 Cables 24 VDC ◄ HD Video from Camera - Power to Camera ▶ Serial Control (RS-232) Distance up to 150’ (15.26m) ZoomSHOT HD Camera Quick-Connect USB Mini Rear Panel (above), Front Panel (below) USB 2.0 Connected to Front Panel Laptop with UC Application USB 2.
ZoomSHOT WallVIEW Mini STEP BY STEP: ZoomSHOT WallVIEW Mini Installation Instructions STEP 1: After determining the optimum location of the camera; route, mark and test the two (2) Cat-5 cables from the camera to the USB Mini Interface located at the table. The two Cat-5 cables should feed-through the hole located on the rear flange of the Thin Profile Wall Mount. If the bracket is mounted on a 1-gang wall box, use the screws supplied with the wall box cover plate to attach the Thin Profile Wall Mount.
ZoomSHOT WallVIEW Mini STEP 6: Connect a USB 2.0, Type-A Male to USB Type-B Male cable from the USB Type-B jack of the USB Mini to the USB 2.0 Type-A port on the laptop or PC. STEP 6 USB 2.0 Cable STEP 7: For best results, set the camera to 720p/59.94 video resolution by turning its rotary resolution switch on the back of the camera to the ‘0’ position (at 6:00) with the notch in the rotary switch pointed straight downward. STEP 8: Using desired third party software, verify UVC file streaming.
ZoomSHOT WallVIEW Mini COMPATIBILITY The Quick-Connect USB Mini will work with the following web browsers, soft codecs, computer operating systems and media players: Compatibility - Web Browsers: 1) Internet Explorer (IE 8 and above) 2) Safari (Rev 4 and 5) 3) Safari/iOS (Rev 4 and 5) 4) Chrome (the latest and current release - auto updating) 5) Firefox (the latest and current release - auto updating) Soft Client Compatibility: The Quick-Connect USB is compatible with the following soft codecs or applicati
ZoomSHOT WallVIEW Mini INTERNAL WEB PAGES AND CONTROL The internal web pages will allow control of the USB Mini and control of the attached camera via a network connection.
ZoomSHOT WallVIEW Mini Screen Shot: Camera Control Page and User Menu for ZoomSHOT (Adjustable in web server mode only) ➊ ➐ ➑ ➋ ➌ ➍ ➎ ➏ 1) Home Control: The Home button will return the camera to a full wide end view (1X). This control is functional with the ZoomSHOT camera. 2) Zoom Control: The ZoomSHOT lens can be controlled with the “+” to zoom-in (tele end) and the “-“ to zoom out (wide end). This control works with the ZoomSHOT, but the manual lens on the WideSHOT can’t be controlled.
ZoomSHOT WallVIEW Mini Screen Shot: Admin Log-in By selecting the Admin Menu Bar, the Admin Login password pop-up window will appear and await the entry of the password. By entering the Admin menus, 10 more menu keys appear on the left side of the screen. The default Admin Account Password is password Cancel and Save Buttons Note: At the bottom of each of the admin menus, there is a Cancel and Save button. Please click on the Save button before exiting each web page if the changes made require retention.
ZoomSHOT WallVIEW Mini Screen Shot: Admin Menu - Camera Settings Page The Camera settings page provides the parameters to allow the end user to match the camera to the environment, set the CCU presets and make startup assignments. Note: These controls can’t be adjusted in real-time while viewing video, but if the IR SHOT Commander is used to change the color settings in video streaming mode, then those settings are reflected on this page, which can be saved in a preset.
ZoomSHOT WallVIEW Mini Gain: Move adjustment slider as required for amount of iris gain desired. A numeric value will be displayed in the box to the right of the slider. Auto White Balance check box: When checked, camera will operate in Auto White Balance mode, when unchecked camera will be in Manual White Balance Mode and allow for adjustment of Red and Blue Gain. Red Gain: Move the adjustment slider as required for amount of Red Gain desired.
ZoomSHOT WallVIEW Mini Screen Shot: Admin Menu - Room Labels The Room Labels menu allows the administrator to label the company name, room name, room phone and help phone on a per USB Mini basis. The labels appear on every page at the top/middle of the page. Simply enter the room information and click Save. Screen Shot: Admin Menu - Networking Under the Networking menu, the Network Configuration page displays the Hostname and allows configuration of Ethernet over the USB port.
ZoomSHOT WallVIEW Mini Screen Shot: Admin Menu - Security The Security menu allows the Admin to UPDATE “user” PASSWORD and UPDATE “admin” PASSWORD. The default “user” password is still password. The default “admin” password is also password. The Network administrator can reassign the user name and password as well as the admin password. There is only one user password and one admin password at any given time. If changes are made, click on Save to store the change.
ZoomSHOT WallVIEW Mini Screen Shot: Admin Menu - System Menu The System Menu is where the Firmware Updates are performed. There will be firmware updates and upgrades over the life of the Quick-Connect. The file for the firmware update is chosen in this menu and the update is started here too. Screen Shot: Admin Menu - Update Confirmation After clicking on “Begin Firmware Update…” a confirmation pop-up and warning will be displayed. Please contact Vaddio Technical Support for assistance with updates.
ZoomSHOT WallVIEW Mini Screen Shot: Admin Menu - Update in Progress After the firmware load is started, a pop-up screen will advise patience and notify, in terms of a percentage completed, the progress of the firmware update load. Again, please don’t interrupt the firmware load. Screen Shot: Admin Menu - Help Service/Help information is located under the Help menu. Support phone numbers and e-mail, manuals, FAQ’s and System information are listed on this page.
ZoomSHOT WallVIEW Mini CONNECTING THE USB MINI AND ZOOMSHOT TO THE PC AND PROGRAM OF CHOICE The USB Mini and attached camera are compatible with many programs and media players. The following is an attempt to generally describe the steps to plug in the USB Mini with a Vaddio ZoomSHOT camera and get an image in a couple of popular programs. Skype Example: 1) After connecting a camera to the USB Mini, with a quality USB 2.
ZoomSHOT WallVIEW Mini GENERAL SPECIFICATIONS ZoomSHOT WallVIEW Mini Part Numbers ZoomSHOT Camera Image Sensor Video Output Resolutions Lens/ Focal Length Horizontal Viewing Angle Video S/N Ratio Minimum Illumination Serial Control Protocol Manual Pan/Tilt Range Preset Positions Tally Light Camera Connectors HD Video Select Camera Settings Thin Profile Wall Mount User Controls Materials & Weight Dimensions: USB Mini Interface Video Outputs USB Interface Network Interface Streaming Protocols Connectors S
ZoomSHOT WallVIEW Mini COMPLIANCE AND CE DECLARATION OF CONFORMITY FOR ZOOMSHOT Compliance testing was performed to the following regulations: FCC Part 15 (15.107, 15.
ZoomSHOT WallVIEW Mini COMPLIANCE AND CE DECLARATION OF CONFORMITY FOR QUICK-CONNECT USB MINI Compliance testing was performed to the following regulations: FCC Part15, Sections 15.107, 15.
ZoomSHOT WallVIEW Mini WARRANTY INFORMATION (See Vaddio Warranty, Service and Return Policies posted on vaddio.com for complete details): Hardware* Warranty: Two (2) year limited warranty on all parts and labor for Vaddio manufactured products. Vaddio warrants its manufactured products against defects in materials and workmanship for a period of two years from the day of purchase, to the original purchaser, if Vaddio receives notice of such defects during the warranty.
ZoomSHOT WallVIEW Mini APPENDIX 1: PIN-OUTS FOR ZOOMSHOT CAMERA Table: ZoomSHOT EZ-POWER VIDEO RJ-45 Port Pin Power & YPbPr Differential Video Pin - 1 Pin - 2 Pin - 3 Pin - 4 Pin - 5 Pin - 6 Pin - 7 Pin - 8 Power+ PowerY+ PB+ PB YPR+ PR- EZ-POWER VIDEO 12345678 Important Note: The EZ POWER VIDEO RJ-45 connector on the ZoomSHOT camera is for use with the Quick-Connect SR, Quick-Connect DVI/HDMI SR, Quick-Connect USB and Quick-Connect USB Mini Interfaces ONLY (568B Wiring Standard).
ZoomSHOT WallVIEW Mini SYSTEM NOTES: ZoomSHOT WallVIEW Mini System Document Number 342-0668 Rev A Page 30 of 32
ZoomSHOT WallVIEW Mini Inside Rear Cover - Blank ZoomSHOT WallVIEW Mini System Document Number 342-0668 Rev A Page 31 of 32
ZoomSHOT WallVIEW Mini Toll Free: 800-572-2011 ▪ Phone: 763-971-4400 ▪ FAX: 763-971-4464 www.vaddio.com ©2014 Vaddio - All Rights Reserved. Reproduction in whole or in part without written permission is prohibited. Specifications and pricing are subject to change without notice or obligation. Vaddio, ZoomSHOT, WideSHOT, WallVIEW, EZCamera, EZIM, Quick-Connect and HSDS are trademarks of Vaddio. All otherZoomSHOT trademarks WallVIEW are property of their respective owners.
