Installation and User Guide VADDIO™ ZOOMSHOT™ WALLVIEW™ SR High Definition Point of View Camera System with 19X Optical Zoom Model Number 999-6918-000 (North America) Model Number 999-6918-001 (International) © 2014 Vaddio - All Rights Reserved.
Zoom SHOT WallVIEW SR TABLE OF CONTENTS Overview .................................................................................................................................................................... 3 Unpacking: ................................................................................................................................................................. 4 Front View with Feature Call-outs ......................................................................................
Zoom SHOT WallVIEW SR OVERVIEW: The Vaddio ZoomSHOT HD camera produces amazing results for small, medium and large room applications. Anywhere that a Pointof-View or stationary camera can be used alone or in conjunction with a Vaddio PTZ camera to simplify camera coverage and preset positioning, the ZoomSHOT is the answer. Essentially, the ZoomSHOT is a low cost pan/tilt/zoom camera, where the pan and tilt are adjusted manually.
Zoom SHOT WallVIEW SR UNPACKING: Carefully remove the product and all of the included parts from the packaging. Identify the following parts for each camera: ZoomSHOT WallVIEW SR Camera System (North America): Part Number: 999-6918-000 One (1) ZoomSHOT HD Camera (998-6918-000) One (1) Vaddio IR SHOT Commander Remote One (1) Quick-Connect SR Interface One (1) 3-Position Phoenix-type Connector for IR Forwarding One (1) 24 VDC, 2.
Zoom SHOT WallVIEW SR Rear Panel Connections with Feature Call-outs Image: ZoomSHOT HD Camera ② ① ④ ③ 1) RS-232 & IR Out: The RS-232 accepts modified VISCA protocol for camera control, as well as transmits IR signaling received by the front IR receiver, which can be transmitted to third party devices.
Zoom SHOT WallVIEW SR QUICK-CONNECT SR INTERFACE Image: Rear Panel with Feature Call-outs ① ② ③ ④ ⑤ 1) Power Input: 5.5mm OD x 2.5mm ID coaxial connector for the provided PowerRite 24 VDC, 2.0 Amp power supply. 2) EZCamera Power & HD Video: A single Cat-5 connection between the EZCAMERA POWER & HD VIDEO RJ-45 connector and the camera’s EZ Power HD Video Port on the HD-19 camera extends power and video. Power is fed to the camera and HSDS video is returned from the camera on the same Cat-5.
Zoom SHOT WallVIEW SR Step By Step Installation Instructions: Step 1: After determining the optimum location of the camera, route, mark and test the two (2) Cat-5 cables from the camera to the Quick-Connect SR Interface located at the head-end. The two Cat-5e cables should feedthrough the hole located on the rear flange of the Thin Profile Wall Mount. If the bracket is to be mounted on a 1gang wall box, use the screws supplied with the wall box cover plate to attach the Thin Profile Wall Mount.
Zoom SHOT WallVIEW SR Image: Basic Wiring Configuration ZoomSHOT Rear View RS-232 & IR OUT Cat-5 For Zoom & CCU Control HSDS (differential) HD Video & 24 VDC Power One (1) Cat-5 Cable ← YPbPr (HSDS differential) Power → Rear Panel Quick-Connect SR Interface YPbPr 24VDC, 2.
Zoom SHOT WallVIEW SR COMPLIANCE AND CE DECLARATION OF CONFORMITY - ZOOMSHOT Compliance testing was performed to the following regulations: FCC Part 15 (15.107, 15.
Zoom SHOT WallVIEW SR WARRANTY INFORMATION (See Vaddio Warranty, Service and Return Policies posted on vaddio.com for complete details): Hardware* Warranty: Two (2) year limited warranty on all parts and labor for Vaddio manufactured products. Vaddio warrants its manufactured products against defects in materials and workmanship for a period of two years from the day of purchase, to the original purchaser, if Vaddio receives notice of such defects during the warranty.
Zoom SHOT WallVIEW SR ZoomSHOT WallVIEW SR General Specifications: ZoomSHOT Camera System Part Numbers Image Sensor Video Output Resolutions Lens/ Focal Length Horizontal Viewing Angle Video S/N Ratio Minimum Illumination Serial Control Protocol Manual Pan/Tilt Range Preset Positions Tally Light Camera Connectors HD Video Select Camera Settings Thin Profile Wall Mount User Controls Materials & Weight Dimensions: ZoomSHOT WallVIEW 999-6918-000 (North America) ZoomSHOT WallVIEW 999-6918-001 (International
Zoom SHOT WallVIEW SR APPENDIX 1: PIN-OUTS FOR ZOOMSHOT CAMERA Table EZCamera Power & HD Video RJ-45 Connector Pin-outs ZoomSHOT EZPOWER HD VIDEO PORT Pin YPbPr 1 Power+ 2 Power3 Y+ 4 PB+ 5 PB 6 Y7 PR+ 8 PR- EZ POWER HD VIDEO 12345678 Important Note: The EZ POWER HD VIDEO RJ-45 Connector is for use with the Quick-Connect SR, Quick-Connect DVI/HDMI SR, Quick-Connect USB and USB Mini Interfaces ONLY (568B Wiring Standard).
Zoom SHOT WallVIEW SR COMMUNICATION SPECIFICATION Communication Speed: 9600 bps (default) Start bit: 1 Stop bit: 1 Data bits: 8 Parity: None No Flow control 12345678 Pin # 1) 2) 3) 4) 5) 6) 7) 8) RJ-45 RS-232 and IR Out Pins Unused Unused Unused IR Output (Diff Signal to Quick-Connect SR) IR Ground (Diff Signal to Quick-Connect SR) GND (GND of IR Short Range - Pin 3) RXD (from TXD of control source) TXD (to RXD of control source) NOTE: The Vaddio ZoomSHOT control protocol is similar, but not identical
Zoom SHOT WallVIEW SR ZoomSHOT Command List (2/2) Command Set CAM_Memory CAM_IDWrite IR_Receive CAM_LR_Reverse CAM_PictureEffect Tally Preset Pan Speed BLK.Enhance GMA.Enhance CRM.Enhance KNE.Enhance DIS.Enhance SNR.Enhance AGC.
Zoom SHOT WallVIEW SR ZoomSHOT Inquiry List (1/1) Inquiry Command CAM_PowerInq Command 8x 09 04 00 FF CAM_ICRModeInq 8x 09 04 01 FF CAM_IDInq CAM_BacklightModeInq 8x 09 04 22 FF 8x 09 04 33 FF CAM_WBModeInq 81 09 04 35 FF CAM_FocusModeInq 8x 09 04 38 FF CAM_AEModeInq 8x 09 04 39 FF CAM_MemoryInq CAM_ApertureInq CAM_RGain CAM_BGain CAM_ZoomPosInq CAM_FocusPosInq CAM_ShutterPosInq CAM_Iris CAM_Gain CAM_Bright CAM_LR_Reverse 8x 09 04 3F FF 8x 09 04 42 FF 8x 09 04 43 FF 8x 09 04 44 FF 8x 09 04 47
Zoom SHOT WallVIEW SR ***Manual AGC Gain: 0:0dB, 1:3dB, 2:6dB, 3:9dB, 4:12dB, 5:15dB, 6:18dB, 7:21dB, 8:24dB, 9:27dB, 10:30dB, 11:33dB, 12:36dB, 13:39dB & 14:42dB Toll Free: 800-572-2011 ▪ Phone: 763-971-4400 ▪ FAX: 763-971-4464 www.vaddio.com ©2014 Vaddio - All Rights Reserved. Reproduction in whole or in part without written permission is prohibited. Specifications and pricing are subject to change without notice or obligation.
