Installation and User Guide VADDIO™ ZOOMSHOT™ WALLVIEW™ USB ZoomSHOT HD Camera System featuring the Quick-Connect USB Interface Model Number 999-6919-000 (North America) Model Number 999-6919-001 (International) © 2014 Vaddio - All Rights Reserved.
ZOOMSHOT WallVIEW USB Camera System TABLE OF CONTENTS Overview ................................................................................................................................................................................................................. 3 Unpacking: ..............................................................................................................................................................................................................
ZOOMSHOT WallVIEW USB Camera System OVERVIEW: The Vaddio ZoomSHOT WallVIEW USB camera system produces amazing results for small, medium and large room applications. Anywhere that a Point-of-View or stationary camera can be used alone or in conjunction with a Vaddio PTZ camera to simplify camera coverage and preset positioning, the ZoomSHOT is the answer. Essentially, the ZoomSHOT camera is a low cost pan/tilt/zoom camera, where the pan and tilt are adjusted manually.
ZOOMSHOT WallVIEW USB Camera System Save These Instructions: The information contained in this manual will help you install and operate your product. If these instructions are misplaced, Vaddio keeps copies of Specifications, Installation and User Guides and most pertinent product drawings for the Vaddio product line on the Vaddio website. These documents can be downloaded from www.vaddio.com free of charge. UNPACKING: Carefully remove the product and all of the included parts from the packaging.
ZOOMSHOT WallVIEW USB Camera System Rear Panel Connections with Callouts Image: ZoomSHOT HD Camera ② ① ④ ③ 1) RS-232 & IR Out: The RS-232 accepts modified VISCA protocol for camera control, as well as transmits IR signaling received by the front IR receiver, which can be transmitted to third party devices. The ZoomSHOT will not react to the remote if the IR is off. IR forwarding is only available in the SR Quick-Connect models.
ZOOMSHOT WallVIEW USB Camera System QUICK-CONNECT USB INTERFACE Image: Front Panel with Feature Call-outs ④ ③ ① ② 1) LCD Blue Backlit Display: 20 x 2 Character, ODV (omni-directional view), ABN (advanced black nematic) display with a high contrast and wide viewing angle combined with high visibility. The MAC address (labeled as “HW” for hardware) is on the top line, and the IP address (static or DHCP) is listed on the bottom line.
ZOOMSHOT WallVIEW USB Camera System Quick-Connect USB Interface Image: Rear Panel with Feature Call-outs ① ② ③ ⑤ ⑦ ④ ⑥ ⑧ ⑨ 1) Power Input: 5.5mm OD x 2.5mm ID coaxial connector for the provided 24 VDC, 2.0 Amp switching power supply. The Quick-Connect USB Supplies Power to the attached camera.
ZOOMSHOT WallVIEW USB Camera System BASIC APPLICATION DIAGRAMS Diagram: Basic Wiring Configuration - Without Network or PC ZoomSHOT HD Camera Rear View ` Cat-5 Cable for RS-232 Control (Zoom and CCU Functions) Cat-5 Cable for Power and Video (EZ-POWER VIDEO) ← HD Video (HSDS differential) Quick-Connect USB Interface Rear Panel Power RS-232 Control → HDMI Video 24VDC, 2.
ZOOMSHOT WallVIEW USB Camera System Diagram: Basic ZoomSHOT WallVIEW USB Configuration - USB 2.0 Streaming ZoomSHOT HD Video Camera Power to Camera > < HD Video to QC-USB Two (2) Cat-5 Cables carry Power, Video and Control Signals Cat-5 Cables up to 150’ (45.72m) Quick-Connect USB Interface HDMI Cable USB 2.0 - MJPEG Video using Standard UVC Drivers Host PC with UC Application HDMI Video Monitor Simulated Video Feed USB 2.
ZOOMSHOT WallVIEW USB Camera System Diagram: Complex System with Audio Local USB 2.0 streaming with Ethernet control, active UC Application and local audio system. ZoomSHOT WallVIEW USB System with Audio ZoomSHOT HD Camera PC “A” with Browser for Control and UC Application to connect to PC “B” on other side Video, Power and Control Two Cat-5 Cables Up to 150’ (45.72m) B PC “B” with Browser for Control and UC Application to connect to PC “A” on other side Quick-Connect USB Interface USB 2.
ZOOMSHOT WallVIEW USB Camera System Step By Step ZoomSHOT WallVIEW USB Installation Instructions: Step 1: After determining the optimum location of the camera; route, mark and test the two (2) Cat-5 cables from the camera to the Quick-Connect USB Interface located at the head-end. The two Cat-5e cables should feed-through the hole located on the rear flange of the Thin Profile Wall Mount.
ZOOMSHOT WallVIEW USB Camera System Quick-Connect USB Details The Quick-Connect USB interface is a Cat-5 camera interface and an IP or USB 2.0 streaming appliance with a built-in webserver for camera set-up and control. The Quick-Connect USB Interface uses UVC (Universal Video Class) drivers for USB 2.0 video and does not require the loading of any other drivers to run on the PC.
ZOOMSHOT WallVIEW USB Camera System Compatible with USB 2.0 UVC Drivers The USB 2.0 UVC (Universal Video Class) video driver resolution table is an internal list of resolutions available for the Host PC and the Quick-Connect USB to negotiate and use for any approved/tested USB application. Typically, the highest resolution possible between both the PC and Quick-Connect USB is used. However, not all OS and application combinations are altogether typical.
ZOOMSHOT WallVIEW USB Camera System Screen Shot: Camera Control Page - No Camera Detected The No Camera Detected window will appear if the Quick-Connect USB has no communication with the camera. Check the camera power and serial connections if no camera is found within 30 seconds of initialization. Screen Shot: User Menu - Camera Control Page ➐ ➊ ➏ ➋ ➍ ➌ ➎ 1) Zoom and Home Controls: The camera’s zoom lens can be controlled with the “+” to zoom-in and the “-“ to zoom-out the ZoomSHOT camera.
ZOOMSHOT WallVIEW USB Camera System 3) Store Preset Button: Clicking the Store button opens up a Store Preset pop-up dialog box. To set presets, set up the camera shot, click on choice of preset number (1 through 6). The preset is stored and the dialog box closes. 4) Camera Presets: Six (6) presets can be recalled simply by clicking a preset number. 5) CCU Scenes: The user has access to the CCU scenes set and stored by the Admin.
ZOOMSHOT WallVIEW USB Camera System Screen Shot: Admin Menu - Camera Settings Page The Camera Settings page provides the parameters to allow the end user to match the camera to the environment, set the CCU presets and make startup assignments. ➊ ➋ ➌ ➍ ➎ 1) Load Preset at Startup: Check this box to move the camera to a predefined preset location when the camera powers up.
ZOOMSHOT WallVIEW USB Camera System Iris: Move adjustment slider as required to adjust the iris opening. A numeric value will be displayed in the box to the right of the slider. Gain: Move adjustment slider as required for amount of iris gain desired. displayed in the box to the right of the slider.
ZOOMSHOT WallVIEW USB Camera System Screen Shot: Admin Menu - USB 2.0 or IP Streaming Mode Page ➊ ➋ ➌ ➍ ➎ 1) Streaming Mode: Streaming can be set for either USB 2.0 streaming (MJPEG) or IP streaming (H.264); but not both at the same time. The QC-USB can stream USB and accept IP control, or it can IP stream with IP control. Choose the streaming mode here. 2) USB Device Name: Allows the user to use a “friendly name” per system.
ZOOMSHOT WallVIEW USB Camera System Screen Shot: Admin Menu - Room Labels The Room Labels menu allows the administrator to label the company name, room name, room phone and help phone on a per QC-USB basis. The labels appear on every page at the top/middle of the page. Simply enter the room information and click Save. ZoomSHOT WallVIEW USB System Document Number 342-0640 Rev.
ZOOMSHOT WallVIEW USB Camera System Screen Shot: Admin Menu - DHCP Network Configuration Under the Networking menu, The Network Configuration and Network Interfaces are displayed. This is where the Network administrator assigns either DHCP or a Static address and the associated parameters. MAC Address, IP Address, Subnet Mask and Gateway will Autofill when in DHCP Mode Screen Shot: Admin Menu - Static IP Configuration If Static IP is used, the IP Address, Subnet Mask and Gateway are manually entered.
ZOOMSHOT WallVIEW USB Camera System Screen Shot: Admin Menu - Security The Security menu allows the Admin to UPDATE “user” PASSWORD and UPDATE “admin” PASSWORD. The default “user” password is: password. The default “admin” password is also: password. The Network administrator can reassign the user name and password as well as the Admin password. There is only one “user” password and one “admin” password at any given time. If changes are made, click on Save to store the change.
ZOOMSHOT WallVIEW USB Camera System Screen Shot: Admin Menu - System Menu The System Menu is where the System Info is displayed and Firmware Updates are performed. There will be firmware updates and upgrades over the life of the Quick-Connect. The file for the firmware update is chosen in this menu and the update is started here. A remote system Reboot and Restore to Factory Presets is also available.
ZOOMSHOT WallVIEW USB Camera System Screen Shot: Admin Menu - Update in Progress After the firmware load has been started, a pop-up screen will advise patience and notify, in terms of a percentage completed, the progress of the firmware update. Please do not interrupt the firmware load (this example is from 1.0.0 to 1.1.0) Screen Shot: Admin Menu - HELP Service/Help information can be found under the Help menu. Support phone numbers and e-mail, manuals, FAQ’s and System information is listed on this page.
ZOOMSHOT WallVIEW USB Camera System CONNECTING THE QUICK-CONNECT USB AND CAMERA TO THE PC AND PROGRAM OF CHOICE: The Quick-Connect USB and attached camera are compatible with many programs and media players. The following is an attempt to generally describe the steps to plug in the QC-USB with a Vaddio camera and get an image. Skype Example: 1) After connecting a camera to the Quick-Connect USB, with a quality USB 2.0 cable, plug the USB-B port of the QC-USB Interface to the USB-A port of the computer.
ZOOMSHOT WallVIEW USB Camera System GENERAL SPECIFICATIONS ZoomSHOT WallVIEW USB Part Numbers ZoomSHOT Camera Image Sensor Video Output Resolutions Lens/ Focal Length Horizontal Viewing Angle Video S/N Ratio Minimum Illumination Serial Control Protocol Manual Pan/Tilt Range Preset Positions Tally Light Camera Connectors HD Video Select Camera Settings Thin Profile Wall Mount User Controls Materials & Weight Dimensions: Quick-Connect USB Interface Video Outputs USB Interface Network Interface Streaming
ZOOMSHOT WallVIEW USB Camera System COMPLIANCE AND CE DECLARATION OF CONFORMITY - ZOOMSHOT Compliance testing was performed to the following regulations: FCC Part 15 (15.107, 15.
ZOOMSHOT WallVIEW USB Camera System COMPLIANCE AND CE DECLARATION OF CONFORMITY, QUICK-CONNECT USB INTERFACE Compliance testing was performed to the following regulations: FCC Part 15 (15.107, 15.
ZOOMSHOT WallVIEW USB Camera System WARRANTY INFORMATION (See Vaddio Warranty, Service and Return Policies posted on vaddio.com for complete details): Hardware* Warranty: Two (2) year limited warranty on all parts and labor for Vaddio manufactured products. Vaddio warrants its manufactured products against defects in materials and workmanship for a period of two years from the day of purchase, to the original purchaser, if Vaddio receives notice of such defects during the warranty.
ZOOMSHOT WallVIEW USB Camera System APPENDIX 1: PIN-OUTS FOR ZOOMSHOT CAMERA AND QUICK-CONNECT USB Table: EZ-POWER VIDEO RJ-45 Connector Pin-outs EZ-POWER VIDEO PORT (Highlighted in Red) Pin 1 2 3 4 5 6 7 8 Signal Power+ PowerY+ PB+ PB YPR+ PR- EZ-POWER VIDEO Cat-5 Cable: Power to Camera, Differential Video from Camera 12345678 Important Note: The EZ-POWER VIDEO RJ-45 Connector on a Vaddio CAT-5 system camera is for use with the Quick-Connect SR, Quick-Connect DVI/HDMI SR, Quick-Connect USB and USB Mi
ZOOMSHOT WallVIEW USB Camera System COMMUNICATION SPECIFICATION Communication Speed: 9600 bps (default) Start bit: 1 Stop bit: 1 Data bits: 8 Parity: None No Flow control 12345678 Pin # 1) 2) 3) 4) 5) 6) 7) 8) RJ-45 RS-232 and IR Out Pins Unused Unused Unused IR Output (Diff Signal used with Quick-Connect SR) IR Ground (Diff Signal used with Quick-Connect SR) GND (GND of IR Short Range - Pin 3) RXD (from TXD of control source) TXD (to RXD of control source) NOTE: The Vaddio ZoomSHOT control protocol is
ZOOMSHOT WallVIEW USB Camera System ZoomSHOT Command List (2/2) Command Set CAM_Memory CAM_IDWrite IR_Receive CAM_LR_Reverse CAM_Freeze CAM_PictureEffect Tally Preset Zoom Speed BLK.Enhance GMA.Enhance CRM.Enhance KNE.Enhance DIS.Enhance SNR.Enhance AGC.
ZOOMSHOT WallVIEW USB Camera System ZoomSHOT Inquiry List (1/1) Inquiry Command CAM_PowerInq Command 8x 09 04 00 FF CAM_ICRModeInq 8x 09 04 01 FF CAM_IDInq CAM_BacklightModeInq 8x 09 04 22 FF 8x 09 04 33 FF CAM_WBModeInq 81 09 04 35 FF CAM_FocusModeInq 8x 09 04 38 FF CAM_AEModeInq 8x 09 04 39 FF CAM_MemoryInq CAM_ApertureInq CAM_RGain CAM_BGain CAM_ZoomPosInq CAM_FocusPosInq CAM_ShutterPosInq CAM_Iris CAM_Gain CAM_Bright CAM_LR_Reverse 8x 09 04 3F FF 8x 09 04 42 FF 8x 09 04 43 FF 8x 09 04 44 F
ZOOMSHOT WallVIEW USB Camera System APPENDIX 2 - TELNET SERIAL COMMAND API The Vaddio Serial Command protocol is a high level text based command line interface supported via telnet session on the Quick-Connect USB. Camera control commands supported on the Quick-Connect USB includes ClearVIEW HD-18, HD-19 and HD-20, PowerVIEW HD-22, HD-30, ZoomSHOT and WideSHOT. The command application protocol interface is intended to allow external device such as AMX or Crestron to control the camera.
ZOOMSHOT WallVIEW USB Camera System Camera Preset NAME camera preset - Recall and storing of camera presets SYNOPSIS camera preset {recall|store} [1-6] DESCRIPTION Method used to recall and store camera presets OPTIONS recall Recall preset store Store preset preset Required value from 1-6 used to indicate the preset number EXAMPLES camera recall 3 Move camera to preset position 3 camera store 1 Store current camera position as preset 1 Camera Tilt (not used with ZoomSHOT camera) NAME ca
Zoom SHOT WallVIEW USB Camera System Exit NAME exit - ends the current API command session SYNOPSIS exit DESCRIPTION Exit ends the current API command session. If the session is over telnet, the session is ended and the socket is closed. If the session is over serial, a new session is started.
Zoom SHOT WallVIEW USB Camera System Network Settings NAME network settings - get current network settings SYNOPSIS network settings {get} DESCRIPTION Method used to get the current network settings of the device OPTIONS get Get the current network settings for the machine EXAMPLES network settings get MAC Address: 00:04:a3:85:0a:ee IP Address: 10.10.8.116 Netmask: 255.255.255.0 Gateway: 10.10.8.
Zoom SHOT WallVIEW USB Camera System Streaming Quality NAME streaming quality - Gets or sets the current streaming quality SYNOPSIS streaming quality {get|low|standard|high} DESCRIPTION Method used to get or set the current streaming quality OPTIONS get Get the current streaming quality low Set video quality to low standard Set video quality to standard high Set video quality to high EXAMPLES streaming quality get quality:low Returns the current streaming quality ---streaming quality standard O
Zoom SHOT WallVIEW USB Camera System System Factory‐Reset NAME system factory-reset - Gets or sets factory reset status SYNOPSIS system factory-reset {get|on|off} DESCRIPTION Method used to get or set the factory reset status OPTIONS get Get the current factory reset status on Enable factory reset on reboot off Disable factory reset on reboot EXAMPLES system factory-reset get factory-reset (software): off factory-reset (hardware): [Hardware reset is designated by rear panel dip switches in down
Zoom SHOT WallVIEW USB Camera System Inside Back Cover - Blank ZoomSHOT WallVIEW USB System Document Number 342-0640 Rev B Page 39 of 40
Zoom SHOT WallVIEW USB Camera System Toll Free: 800-572-2011 ▪ Phone: 763-971-4400 ▪ FAX: 763-971-4464 www.vaddio.com ©2014 Vaddio - All Rights Reserved. Reproduction in whole or in part without written permission is prohibited. Specifications and pricing are subject to change without notice or obligation. Vaddio, ZoomSHOT, ProductionVIEW, WallVIEW, EZCamera, Quick-Connect and HSDS are trademarks of Vaddio. All other trademarks areWallVIEW property ofUSB theirSystem respective owners.
