Installation Instructions

Assembly and installation 5
0020147164_04 aroTHERM Installation instructions 13
dB(A)
dB(A)
▶ Note any noise emissions from the fan and compressor.
5.1.2.4 Installing the heat pump
1. Note the safety information in this manual and in the
operating instructions before installing the product.
2. Install the product on steel beams, concrete blocks or
using a wall holder (accessory).
3. Ensure that no water collects under the product.
4. In order to avoid ice formation, ensure that the ground
in front of the product can absorb water well.
5.1.2.5 Preparing the condensate discharge
>100mm
Danger!
Risk of injury due to frozen condensate.
Frozen condensate on paths may cause falls.
▶ Ensure that condensate does not dis-
charge onto paths and that ice cannot
build up there.
The condensate is discharged centrally underneath the
product.
▶ Prepare the condensate discharge using a drain line or in
a gravel bed.