Installation Instructions

9 Decommissioning
28 Installation instructions aroTHERM 0020147164_04
9 Decommissioning
9.1 Temporary decommissioning
1. Switch the product off.
2. Disconnect the product from the power supply.
9.2 Permanently decommissioning
1. Switch the product off.
2. Disconnect the product from the power supply.
3. Drain the product. (→ Page 26)
4. Dispose of or recycle the product and its components.
10 Vaillant customer service
10.1 Customer service
To ensure regular servicing, it is strongly recommended
that arrangements are made for a Maintenance Agreement.
Please contact Vaillant Service Solutions (0870 6060 777)
for further details.
To ensure efficient and reliable operation of your boiler it is
recommended that regular servicing is carried out by your
service provider:
Vaillant Applied System Sales
Vaillant Group UK Ltd.
Nottingham Road
Belper
Derbyshire DE56 1JT
United Kingdom
VaillantTraining: 845 601 88 85
E-mail: [e-mail]
Commercial service assistance: 870 850 30 72 (Mon-Fri
8:30am – 5:30pm)
Technical advice: 844 693 31 33 (Mon-Fri 8:30am – 5:30pm,
Sat 9:00am - 4:00pm)
E-mail: [e-mail]
11 Disposal
11.1 Recycling and disposal
▶ The competent person who installed your product is re-
sponsible for the disposal of the packaging.
If the product or any batteries that it contains are
marked with this symbol, they contain substances hazardous
to human health and to the environment.
▶ In this case, do not dispose of the product and any bat-
teries that it contains with your normal household waste.
▶ Instead, bring the product and any batteries to a collec-
tion centre for batteries and electrical or electronic appli-
ances.
11.2 Arranging disposal of coolant
Warning.
Risk of damage to the environment.
This heat pump contains R 410 A coolant.
The coolant must not be allowed to escape
into the atmosphere. R 410 A is a fluorinated
greenhouse gas covered by the Kyoto Pro-
tocol, with a GWP of 1725 (GWP = Global
Warming Potential).
▶ Before the product is disposed of, have
the coolant which it contains completely
drained into a suitable vessel so that it
can then be recycled or disposed of in
accordance with regulations.
The competent person who installed the heat pump must
dispose of the coolant.
Personnel who are approved for energy recovery must have
the relevant certification that corresponds to the valid regula-
tions.