Technical data

16 Installation and maintenance manual atmoCRAFT

Fig. 4.11 Fitting the intermediate plate and side plates

• Fix one side plate (1) to the baseframe front and back

with two screws.

• Screw the intermediate plate (2) in front of the boiler.

The intermediate plate is placed on the brackets and

screwed in position in the lower area with four screws.

• Fix the other side plate (3) to the baseframe front and

back with two screws.

• Fix the side plates to the intermediate plate at the top

with screws.

Fig. 4.12 Fitting the cross-beam

• Insert the projections (1) on the cross-beam (2) into

the openings in the side plates and screw the cross-

beam to the side plates left and right using two self-

tapping screws on each.

Fig. 4.13 Mounting the electronic box

• Now fit the electronic box (1).

• Push the box onto the holders (2) on the beam and fix

the box with the retaining straps (3).

Fig. 4.14 Fitting the STL

• Fit the safety temperature limiter (STL) (1) onto the

cross-beam on the left next to the electronic box.

• Connect the STL to the plug sockets provided in the

electronic box.

4 Assembly