Operation Manual

11Installation instructions – auroMATIC 560 0020008427_01
230V Netz
F 1
T4
Kol1-P
Kol2-P / ZP
LEG/BYP
EP
LP/UV 1
VRS 560
C1/C2
Kol1
Sp1
Sp2
Sp3
Ertrag
Kol2
5 V / 24 V 230 V~
Fig. 5.6 Connection diagram for hydraulic plan 1: Integration of
auroMATIC 560 in monovalent systems
H
Danger!
Danger of overheating!
When integrating the controller, always install
a thermostatic mixer valve to limit the maxi-
mum temperature to prevent scalding and pro-
tect the unit. Depending on the boiler, set it at
60 °C (for example).
h
Note
The VED E Solar monitors the inlet tempera-
ture independently and switches in the hot
water post-heating according to the tempera-
ture of the solar cylinder. An additional control
command is not required in this case.
Electrical installation 5