Operation Manual

19Installation instructions – auroMATIC 560 0020008427_01
Designation in
hydraulic plan/
wiring diagram
Components
C1/C2 Connections for controlling the heater used for
reheating the cylinder
HZ-K Heating circuit
KW Cold water
EP Electrical heating rod (optional)
SR Swimming pool controller (provided by custom-
er)
LP/UV 1 Diverter valve
1
LP/UV 1 diverter valve in de-energised state
A Alternative connection for second cylinder
Kol1-P Solar circuit pump 1
Kol1 Collector sensor 1
Kol2-P/ZP Reheating pump 2
Kol2 Reheating sensor 2
Table 5.8 Key for Fig. 5.13 and Fig. 5.14
230V Netz
F 1
T4
Kol1-P
Kol2-P / ZP
LEG/BYP
EP
LP/UV 1
VRS 560
C1/C2
Kol1
Sp1
Sp2
Sp3
Ertrag
Kol2
5 V / 24 V
230 V~
VC / VK
Fig. 5.14 Connection diagram for hydraulic plan 3: Connection
of a second cylinder or swimming pool
h
Note
LEG/BYP can be used as a legionella protection
pump or an electric heater cartridge. Only one
of these options can be used.
Designation in
hydraulic plan/
wiring diagram
Components
Yield Sensor for measuring yield (optional)
LEG/BYP Legionella protection pump or electric heater
cartridge
Sp1 Cylinder sensor 1
Sp2 Cylinder sensor 2
Sp3 Cylinder sensor 3
S Control of contactor for optional electrical
heating rod
2 400 V connection, 3 phase
3 Mixer valve
230 V~ 230 V main power connection
F1 (T4) Fuse holder
VC/VK Heater wiring area
Table 5.8 Legend for Fig. 5.13 and Fig. 5.14 (continued)
Electrical installation 5