Operation Manual

7Operating manual – auroMATIC 560 0020008427_01
5 Operation
5.1 Operator guidance
The controller has a display which consists of symbols,
and is designed according to the Vaillant "turn and
click" operating concept. You can call up and set values
by turning the dial. You can also click the dial in order to
call up values within an operating level. You can access
the operating and display levels with the three selection
buttons.
To prevent operating errors, the programming button
must be held down for roughly three seconds to reach
the installer level.
5.2 Overview of controls
1
2
Fig. 5.1 Controls
Key
1 Display
2 Dial (turn and click)
i Information button
F Special functions button
P Programming button
5.3 Overview of display
8
9
10
11
12
13
4
1
2
3
5
6
7
Fig. 5.2 Display
Key
1 Programming level
2 Service/diagnostics level
3 Reheating
4 Info level
5 Programming of timer programs
6 Solar yield (flashes if solar yield is available)
7 Units
8 Cursor
9 Multi-function display
10 Weekdays
11 Target/actual value
12 Operating modes
13 Special functions
Display symbols
Timer programs:
Timer program for reheating function
Programming of timer program for connected cir-
culation pump
Operating modes:
Reheating function with timer program
Reheating function in constant standby mode
No reheating
No actuation of solar pump(s),
no reheating
Special functions:
Party
One-time reheating
Holiday function
Operation 5