Installation Instructions

4 On-roof fitting and installation
16 Installation manual auroTHERM exclusive 0020077994_02
4.1.5 Putting together components
Note
In the case of roof batten clearances greater than 460 mm, the 2-row and 3-row installations are not possible.
In this case, you can install the 2 or 3 rows individually (without using the same central roof anchor).
Conditions: Collector rows: 1
▶ Use the following table to put together the components for installation.
Number of VTK 1140/2 collectors 1 2 3 4 5 6 7
Components Required sets
VTK installation set (basic set)
1
1
VTK installation set (extension set)
− 1 2 3 4 5 6
Roof bracket set type P (pantile)
1
2
2
2
3
2
4
2
5
2
6
2
7
2
Roof bracket set type S (slate)
Roof bracket set type S, flat (slate)
Roof anchor set, hanger bolt
Rail set (2 pcs), VTK 1140/2
1 2 3 4 5 6 7
1
1 set for connecting to the pipelines; the collectors are connected together using the extension set
2
valid up to 700 m above sea level
Number of VTK 1140/2 collectors 1 2 3 4 5 6
Number of VTK 570/2 collectors 1 1 1 1 1 1
Components Required sets
VTK installation set (basic set)
1
1
VTK installation set (extension set)
1 2 3 4 5 6
Roof bracket set type P (pantile)
2
2
3
2
4
2
5
2
6
2
7
2
Roof bracket set type S (slate)
Roof bracket set type S, flat (slate)
Roof anchor set, hanger bolt
VTK 1140/2 rail set
1 2 3 4 5 6
VTK 570/2 rail set
1