Installation Instructions

Installation
12 Installation instructions VRC 470f 0020124645_00
4
1
2
Fig.4.4 Fitting the wall-mounting base
> Drill two holes of 6 mm diameter matching the posi-
tions of the fixing holes.
> Insert the wall plugs supplied.
> Fix the wall-mounting base to the wall using two
screws (1, 2).
1
2
Fig.4.5 Starting up the outside temperature sensor/transmit-
ter
1 LED
2 Button
> Activate the outside temperature sensor/transmitter
by pressing the red button (2) on the back of the unit
with a pointed implement.
The green LED (1) will flash for about 30 seconds.
i
Be certain to start up the outside temperature
sensor/transmitter as otherwise no data (e.g.
outside temperature) will be transmitted to
the radio receiver unit.
Fig.4.6 Attaching the outside temperature sensor/transmitter
> Slide the outside temperature sensor/transmitter onto
the wall-mounting base until it clicks into position.