Owner`s manual

Audio input dedicated for XM radio receiver can only be used for integration. Control of XM Radio

Receiver supports both Terk®

XMDirect™ and XMCommander™ universal satellite tuners.

This unit

XM Radio

is done through your head unit or the steering wheel controls (explained below).

This unit can be programmed in .

Please see attached chart to determine which emulation mode is compatible with your vehicle.

By connecting this unit to the factory system you add a logical device ( ).

The Radio display will show device as a “CD/CD1/CD2” or “MD1”.

CD changer emulation mode , MD changer emulation mode or SAT Emulation

XM Radio interface

Functionality Description

XM Radio CH001 (MD changer with a MD-TEXT)

XM Radio CH019 (CD changer emulation)

XM Radio CH027 (MD changer emulation)

XM Radio CH023 (MD changer emulation)

For Radio Integrated into Navigation System

CD changer emulation

For Radio Receiver with LCD

MD changer emulation

For Radio Receiver with LCD

XM Radio CH081 (MD changer emulation)

XM Radio CH023 (CD changer emulation with CD-Text)

CD/MD Changer Emulation

Select desired source by pressing button on the head unit or on the steering wheel control.

(See diagram below)

DISC MODE

Head Unit:

“DISC” “CD”To switch between the unit sources you need to use the or button on the radio

(Diagram below assumes factory CD changer is present).

CDCD1

XM Radio

MD1

XM Radio

Source Selection (CD/MD Emulation)

Head Unit Controls

Steering Wheel control:

To switch between the unit sources you need to use the “MODE” button on the steering wheel control.

(Diagram below assumes following sources are present).

FM1

FM2

TAPE

CD1

XM Radio