VAIS TECHNOLOG Y www.vaistech.com Owner’s Manual Model :SL2iC iPod Out and iPod Video Out interface Unit compatibility iPod touch 2nd generation iPod touch 3rd generation iPod touch 4th generation iPhone 4 iPhone 3G iPhone 3GS iOS 4.0 and up iPad iOS 4.
Before You Start 2 ! WARNING DO NOT DISASSEMBLE OR ALTER Doing so may result in an accident, fire or electric shock. Do not block your view Do not mount product or any added audio and/or video equipment where it can block your view through the windshield or your view of dashboard indicators and displays. Do not block the airbag Do not mount product or any added audio and/or video equipment where it can obstruct the operation of the safety device such as the airbag.
Before You Start i ! ! ! ! IMPORTANT iPod is a registered trademark of Apple Computer, Inc., registered in the United States and other countries. The iPod has NOT been designed to withstand automotive temperature extremes. You may damage your iPod If you leave it inside the vehicle on a hot or cold day. For further information please refer to the iPod manual.
Before You Start i IMPORTANT PLEASE READ! ! WARNING VAIS TECHNOLOGY SHALL NOT BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES OR DAMAGES TO PERSONS OR PROPERTY ARISING OUT OF THE USE OF THE PRODUCT, OR FOR ANY LOSS OF BUSINESS OR PROFITS, EVEN IF VAIS TECHNOLOGY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Connections Connecting SoundLinQ2 (SL2iC) Audio Wiring Harness (included) Audio Y-Harness (included) To SL2iC-VCM assembly (see picture below) To the Head Unit To the factory Audio harness Connecting the units Model :SL2iC Used for programming Service Port SL2iC-VCM assembly harness Power and Audio wiring harness To Multi-Display Unit SL2iC-VCM assembly Factory DVD changer/player 6-pin harness To Multi-Display Unit 6-pin connector (DVD harness) iPod/iPhone connector To Navigation ECU (Anten
Connections Connecting SoundLinQ2 to head unit (for Lexus vehicles) Head Unit (Radio Receiver) A 20-pin connector Lexus GX 470 Radio Receiver shown. Locate connector “A” (20-pin connector) on your Radio. Connector location on the Radio may be different from shown above.
Installation i IMPORTANT We strongly recommend that you install the unit in easily accessible location. So you can later upgrade the unit or re-program it in case of incorrect programming. Installation ! ! ! Gain access to the back of you vehicle’s Head Unit. Find the same port as our Audio Harness (see “Connecting SoundLinQ2 to head unit”) Disconnect the existing connector and plug in our Audio connector into this port, then plug female end of Audio Harness to the plug in for your factory connector.
Installation CD-MP3 Emulation Mode Selection (CD-MP3 emulation) CD-MP3 Emulation Mode programming steps: ! ! ! ! ! ! ! ! Properly install this unit. Put “Left” programming switch in “DOWN” position. Put ignition switch into the “ACC” position. Wait for long beep followed by a few short beeps. This may take up to one minute. Return programming switches into their default position (both switches “UP”). Wait up to 30 seconds until confirmation beep. Put ignition switch into the “OFF” position.
Force Program 9 Force 2 Mode programming steps: ! ! ! ! ! ! ! ! ! ! ! ! ! Put switches in appropriate position (CD or MD) for programming according to application guide. Put ignition switch to “ACC” position. Wait for long beep followed by a few short beeps. This may take up to one minute. Put “Both” programming switches in “UP” position, wait for long beep (can take up to 30 seconds) Put “Right” programming switch in “DOWN” position, wait for beep.
Force Program 10 Force 3 Mode programming steps: ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! Put switches in appropriate position (CD or MD) for programming according to application guide. Put ignition switch to “ACC” position. Wait for long beep followed by a few short beeps. This may take up to one minute. Put “Both” programming switches in “UP” position, wait for long beep (can take up to 30 seconds) Put “Right” programming switch in “DOWN” position, wait for beep.
Controls 11 Functionality Description Using your “Disc” button to cycle through your playback options selection will be as follows... Or for cars equipped with factory DVD ... Other factory devices CD DVD OR ... CD iPod Out TRACK+ and TRACK- Select the desired track DVD OR iPod Out SCROLL UP DVD-CH DVD factory DVD-CH iPod Out and ...
Controls 12 Pressing the “Wide” button will allow you to change the format in which the video is played. Options are as follows: Normal, Wide1, Wide2 Using “Wide2” may cut off some of the picture! SL2iC Welcome Screen will be displayed every time you activate SL2iC device for about 5 sec. Safety warning be displayed right after it for another 5 sec. SL2iC Welcome Screen will be displayed if NO video source present SL2iC Welcome Screen will be displayed if NO iPod/iPhone is connected.
Controls return to previous “iPod Out” Menu 13 Previous/ Rewind Stop Control Joystick Hide menu Pause Play Additional functions Page 2 Next/ Fast-Forward Scroll Up in “iPod Out” browsing list (inoperable in “Now Playing” screen) Multi-Functional Button ENTER Simple touch RETURN Touch and hold until first beep MODE Touch and hold until second beep and use UP arrow to select REPEAT mode and DOWN arrow to change SHUFFLE Previous/ Rewind (inoperable in “iPod Out” browsing list) Select alternative C
Controls 14 Used to enter “Setup Menu” Not in use Used to switch between “iPod Out” and “iPod Video Out” modes Return to Page 1 All 3 buttons used to activate/deactivate NAV/BT unlock function Activate / Deactivate Navigation/BlueTooth Unlock Function All 3 buttons used to activate/deactivate NAV/BT unlock function NAV/BT Unlock is activated using one of the three buttons above. All three buttons have the same function.
Controls 15 Activate / Deactivate “I Agree” Automatic Bypass Function Used to activate/deactivate automatic “I Agree” bypass function Return to Page 2 Menu All these functions are Not in use About “Video Unlock” Function (operable while in motion) In order to exit out of the Key Code screen, you need to enter a code. No other buttons will allow you to exit out of this screen except for entering the code.
LICENSING AGREEMENT, DISCLAIMERS AND LIMITED WARRANTY 16 VAIS TECHNOLOGY, LLC LICENSE AGREEMENT VAIS TECHNOLOGY- SoundLinQ (SLU), (SLI), (SLX), (SLS), (SLXI), (SLSI) and SoundLinQ2 (SL2i),(SL2x),(SL2s),(SL2xmt),(SL2Vi),(SL2iC) for U.S.A. (hereinafter referred to as ‘PRODUCT’) and its related software For Most Toyota/Lexus Vehicles 2001-2009; (hereinafter collectiv ely referred to as ‘PRODUCTS’). THIS IS A LEGAL AGREEMENT BETWEEN YOU, AS THE END USER, AND VAIS TECHNOLOGY, LLC (“VAIS”).
A COPY OF THE ‘OPERATIONAL WARNINGS AND SAFETY INSTRUCTIONS’ IS TO BE KEPT WITH THE VEHICLE AT ALL TIMES. 3.DISCLAIMER AND LIMITATION OF WARRANTIES . (A) EXCEPT AS OTHERWISE CONTAINED HEREIN , the PRODUCTS and related documentation are provided to you, “AS IS”.
5. LIMITED WARRANTY. VAIS warrants that the PRODUCTS will be free from defects in materials and workmanship for a period of ONE (1) YEAR from the date of purchase. VAIS’S sole obligation under this warranty is to repair or replace at VAIS'S option, any PRODUCTS that VAIS shall have determined to be defective. Any replacement of parts, shall at the option of VAIS and at no additional charge to the enduser, be new or rebuilt/re-engineered replacement parts.
6. OTHER PROVISIONS: A. INDEMNIFICATION OF VAIS, ITS AGENTS AND EMPLOYEES . By Purchasing, Installing and Using the Products, You, the EndUser, agree to indemnify, defend and hold harmless, VAIS, and it s Affiliates, Directors, Officers, Agents and Employees from an y Liabilities, Damage, Loss, Claim and Expense (including reasonable Attorney’s Fees) arising out of the installation and use of the Products. B. GOVERNING LAW.
