www.vaistech.
Before You Start 2 WARNING DO NOT DISASSEMBLE OR ALTER Doing so may result in an accident, fire or electric shock Do not block your view Do not mount product or any added audio and/or video equipment where it can block your view through the windshield or your view of dashboard indicators and displays. Do not block the airbag Do not mount product or any added audio and/or video equipment where it can obstruct the operation of any safety devices such as the airbag.
Before You Start 3 IMPORTANT This unit is an interface adapter for Toyota/Lexus head unit to control the SiriusXM Tuner SXV300 (SOLD SEPARATELY) . This unit is equipped with: ! ! Built-in Electronic Ground Noise Isolator to eliminate unwanted car engine noise. Resettable Fuses (provides protection for electronic circuits from over-current conditions) About SiriusXM Satellite Radio Operation ! ! ! The unit may refuse to change the channel if your reception is going ON and OFF.
Connections Connecting the units SoundLinQ3 12-Pin Audio with Y Harness (43”) SoundLinQ3 Interface Adapter Model SL3sat SoundLinQ3 20-Pin Audio with Y Harness (43”) Vehicle Antenna and SiriusXM Tuner SXV300 are included in SL3sat-TKIT only SiriusXM Tuner SXV300 Vehicle Antenna RED LED Service Port Power and Audio wiring harness Mode Programming switch Interface connector for SiriusXM SXV300 Tuner
Connections Connecting SoundLinQ3 to head unit using 20-pin Y-harness Head Unit (Radio Receiver) A 20-pin connector Lexus GX 470 Radio Receiver shown as an example. Locate connector “A” (20-pin connector) on your Radio. Connector location on the Radio may be different from shown above.
Installation ! ATTENTION Look into Application Guide Chart (enclosed) to determine which emulation to program your unit into. Match year, make, and model of your car and cross reference it with MD, CD, or SAT emulation in EMULATION column. IMPORTANT We strongly recommend that you install the unit in an easily accessible location, so you can later upgrade the unit or re-program it in case of incorrect programming. Installation @ @ @ @ @ @ @ @ @ Gain access to the back of your vehicle’s Head Unit.
Installation Emulation Mode Selection (CD and MD changer emulation) MD Changer Emulation Mode programming steps: @ @ @ @ @ @ @ @ Properly install the unit. Put both programming switches in the “DOWN” position. Put ignition switch into the “ACC” position. Wait for a long beep followed by a few short beeps. This may take up to one minute. Return programming switches into their default position (both switches “UP”). Wait up to 30 seconds until confirmation beep.
Emulation SAT EMULATION PAGES 9-12 ----------------------------------CD CHANGER OR MD CHANGER EMULATION PAGES 13-17
SAT Radio Emulation Functionality Description 9 SAT Emulation Audio input dedicated for SiriusXM Satellite Radio can only be used for SiriusXM Radio integration. Control of SiriusXM Satellite Radio is done through your head unit or the steering wheel controls (explained below). This unit supports the SiriusXM Tuner Model # SXV300. Please see attached chart to determine which emulation mode is compatible with your vehicle.
SAT Radio Emulation Head Unit Controls 10 Source Selection (SAT Emulation) Select desired source by pressing the AM button on the head unit or MODE on the steering wheel control. (See diagram below) Head Unit: To switch between unit sources, press the AM button on the head unit. The AM button will cycle through the following modes: AM radio, SAT1, SAT2, and SAT3. SAT1, SAT2 and SAT3 are presets for the satellite receiver.
Satellite Radio controls SAT Radio Emulation 11 MANUAL TUNING Use the TUNE knob on the head unit to select channels. You can rapidly scan channels by turning the knob faster in the direction you wish to scan. CHANNEL SEEK TRACK+ and TRACK- Use the SEEK-TRACK button on the stereo head unit to select the next available channel. The unit will automatically skip channels that are not available.
SAT Radio Emulation Satellite Radio controls 12 Tuner Radio ID Select Channel 255 Tuner “RADIO ID” Satellite Radio Input Settings You can adjust the input sound level of your satellite receiver. The sound level adjustment allows you to balance the volume control with other sources connected to your head unit (such as CD player, FM radio, etc), and eliminate possible distortions caused by high input levels.
CD/MD Changer Emulation Functionality Description 13 CD/MD Changer Emulation Audio input dedicated for SiriusXM Satellite Radio can only be used for Satellite Radio integration. Control of SiriusXM Satellite Radio is done through your head unit or the steering wheel controls (explained below). This unit supports the SiriusXM Tuner Model # SXV300. This unit can be programmed in CD changer emulation mode , MD changer emulation mode or SAT Emulation.
Satellite Radio controls CD/MD Changer Emulation 14 You must set the correct Display Mode, in order to display channel number and TEXT information correctly. ( See “Satellite Radio Input Settings” for details). TRACK+ and TRACK- Select Next/Previous channel (if the selected channel is not available, the unit will jump to the next available channel). (SCROLL) and Speed channel selection +10, -10 (if the selected channel is not available, the unit will jump to the next available channel).
CD/MD Changer Emulation Satellite Radio controls 15 Presets Adding a new PRESET @ @ @ Select the desired channel Press the [RPT] or [REPEAT] button 4 times (MUST BE DONE within 1-2 seconds). You will hear a beep. SoundLinQ3 will store the current channel in the preset list. You can store up to 10 preset channels, and channels get recorded in sequential order. NOTE: Beep indicates successfully accomplished operation. If you do not hear a beep, please repeat the above steps.
Satellite Radio controls CD/MD Changer Emulation 16 Display Settings About Display Settings SoundLinQ3 supports 8 types of Display Modes. Display Mode can ONLY be set up for the Satellite Radio source. It is critical to setup, the correct Display Mode for the following reasons: ! For Channel information to be displayed correctly. ! For Text information to be displayed. Display mode 1 - Minutes and Seconds used to display the selected channel number. Minutes display hundreds, seconds display 00-99.
CD/MD Changer Emulation Satellite Radio controls 17 Display Settings Displaying Channel Information Track number, Minutes, and Seconds are used to display the selected satellite channel number. NOTE: For cars with the Radio integrated into the Navigation System, “DISC” number MUST BE “invisible” or “12” in order to have all ten numbers available for “Direct entry”.
LICENSING AGREEMENT, DISCLAIMERS AND LIMITED WARRANTY 18 VAIS TECHNOLOGY, LLC LICENSE AGREEMENT VAIS TECHNOLOGY- SoundLinQ3 (SL3i),(SL3x), (SL3s), (SL3sat) for U.S.A. (hereinafter referred to as ‘PRODUCT’) and its related software For Most Toyota/Lexus Vehicles 2001-2013; (hereinafter collectiv ely referred to as ‘PRODUCTS’). THIS IS A LEGAL AGREEMENT BETWEEN YOU, AS THE END USER, AND VAIS TECHNOLOGY, LLC (“VAIS”).
A COPY OF THE ‘OPERATIONAL WARNINGS AND SAFETY INSTRUCTIONS’ IS TO BE KEPT WITH THE VEHICLE AT ALL TIMES. 3.DISCLAIMER AND LIMITATION OF WARRANTIES . (A) EXCEPT AS OTHERWISE CONTAINED HEREIN , the PRODUCTS and related documentation are provided to you, “AS IS”.
5. LIMITED WARRANTY. VAIS warrants that the PRODUCTS will be free from defects in materials and workmanship for a period of ONE (1) YEAR from the date of purchase. VAIS’S sole obligation under this warranty is to repair or replace at VAIS'S option, any PRODUCTS that VAIS shall have determined to be defective. Any replacement of parts, shall at the option of VAIS and at no additional charge to the enduser, be new or rebuilt/re-engineered replacement parts.
6. OTHER PROVISIONS: 20 A. INDEMNIFICATION OF VAIS, ITS AGENTS AND EMPLOYEES . By Purchasing, Installing and Using the Products, You, the EndUser, agree to indemnify, defend and hold harmless, VAIS, and it s Affiliates, Directors, Officers, Agents and Employees from an y Liabilities, Damage, Loss, Claim and Expense (including reasonable Attorney’s Fees) arising out of the installation and use of the Products. B. GOVERNING LAW.
VAIS Technology SiriusXM integration application guide 8811 American Way, Suite 125. Englewood CO 80112 Tel: 720-733-2348 Fax: 720-528-7683 E-mail: info@vaistech.
VAIS Technology SiriusXM integration application guide 8811 American Way, Suite 125. Englewood CO 80112 Tel: 720-733-2348 Fax: 720-528-7683 E-mail: info@vaistech.com Make Model Year Audio System Giulia Stelvio 2018 With Factory USB GSR-A01 Uconnect 4.3 GSR-051 Uconnect 3.
VAIS Technology SiriusXM integration application guide 8811 American Way, Suite 125. Englewood CO 80112 Tel: 720-733-2348 Fax: 720-528-7683 E-mail: info@vaistech.
