Owner manual

User's Guide ______________________________________________________________________
98 __________________________________________________________________ M211296EN-B
Connecting Batteries
WARNING
Do not connect the batteries until AWS330 is ready for powering.
The work order for connecting the AWS330 backup batteries:
1. Insert the flat connectors to battery terminals.
2. Mount the batteries and hook the straps.
3. When ready for powering, connect the battery cables to the flat
connectors.
1012-213
Figure 53 Connecting Battery
The following numbers refer to Figure 53 above:
1 = Screw M4x16 DIN933 A4; use wrench 7 mm
2 = Spring washer B4 DIN127 A4
3 = Washer A4.3 DIN125 A4
4 = Flat terminal
5 = Battery cable
6 = Nut M4 DIN934 A4; wrench 7 mm