Owner manual

Chapter 5 __________________________________________ Software Configuration and Operation
VAISALA ______________________________________________________________________ 107
Establishing Connection
You can establish a connection with the QML logger by clicking the
Open connection button or from the menu File - Connect. This will
open a new window shown in Figure 60 below.
1101-015
Figure 60 Establishing Connection
This window displays the connection parameters for the default
connection. (You can add more connections. See section Using Address
Book on page 140.) Note that in the default connection, the COM port is
set to 1 as default. You need to check that this matches the assigned port
as described in section Installing USB Driver on page 104 and change it
when necessary.
To change the COM port in the connection parameters, click Address
Book and a new window opens.