Owner manual

User's Guide ______________________________________________________________________
164 _________________________________________________________________ M211296EN-B
Resetting QML Logger
The Reset command is used for resetting the QML logger. You can
either reset the logger immediately or after a specified delay. To reset the
logger, proceed as follows:
1. On the Maintenance menu, select Reset.
2. The Reset menu includes two options for resetting the logger:
a. To reset the logger immediately, select Immediate. The
logger reset begins.
b. To reset the logger after a specified delay, select Delayed.
The Delayed Reset prompt is displayed.
0802-165
Figure 100 Delayed Reset Prompt
- In the Reset delay (s) field, enter the delay (in seconds)
after which you want the logger to be reset. The logger
reset will begin after the specified delay has elapsed.
- Select OK. The logger reset will start after the delay
specified in the previous step.
Once the reset is complete and the setup is running without problems, the
AWS Client terminal window displays the text Setup running ok, and
the logger is again ready for use.