Owner manual

Chapter 4 _______________________________________________________________ Installation
VAISALA _______________________________________________________________________ 83
NOTE
Keep the original solar radiation sensor packaging for later shipments.
Although all sensors are weatherproof and suitable for harsh ambient
conditions, they do partially consist of delicate mechanical parts. It is
recommended that you use the original shipment packaging in order to
safely transport the equipment to the measurement site.
NOTE
The drying cartridge of the pyranometer might need to be changed at
times. See maintenance instructions of the sensor in section Pyranometer
CMP6 on page 183.
1012-186
Figure 41 Installing Pyranometer CMP6
The following numbers refer to Figure 41 above:
1 = Sensor support
2 = Mounting plate KZFIXPLATE
3 = Pyranometer CMP6
4 = Washer B6 DIN127 A4, 2 pcs
5 = Screw M6x16 DIN912 A4, 2pcs; use Allen key 5 mm
6 = Screw M5, found in sensor package, 2 pcs, slot-head; use slothead
screwdriver
7 = Nylon rings, found in sensor package, 2 pcs
8 = Leveling screw