Owner's manual
Table Of Contents
- DMT345/346 USER'S GUIDE
- TABLE OF CONTENTS
- GENERAL INFORMATION
- PRODUCT OVERVIEW
- INSTALLATION
- OPERATION
- Getting Started
- Display/Keypad
- MI70 Link Program for Data Handling
- Serial Line Communication
- LAN Communication
- Communicating with a Transmitter in POLL Mode
- General Settings
- Serial Output Settings
- Data Recording
- Analog Output Settings
- Operation of Relays
- Sensor Functions
- MODBUS
- MAINTENANCE
- CALIBRATION AND ADJUSTMENT
- TECHNICAL DATA
- EXAMPLE INSTALLATION OF DMT346
- CALCULATION FORMULAS
- MODBUS REFERENCE
Chapter 8 _____________________________________________________________ Technical Data
VAISALA _______________________________________________________________________ 163
0604-022
Figure 79 Dewpoint Measurement Accuracy Graph DMT346
Table 40 Mixing Ratio Specifications DMT346
Property
Value
Measurement range (typical)
0 ... 1000 g/kg (0 … 7000 gr/lbs)
Accuracy
±12 % of reading
Table 41 Operating Environment Specifications (Both Models)
Property
Value
Mechanical durability
probes
Up to +180 °C (+356 °F) for DMT345
Up to +350 °C (+662 °F) for DMT346
for transmitter body
-40 ... +60 °C (-40 ... +140 °F)
with display
0 ... +60 °C (32 … +140 °F)
Storage temperature range
without display
-55 … +80 °C (-67 … +176 °F)
with display
-40 … +80 °C (-40 … +176 °F)
Pressure range for probes
Slight pressure difference (~ 200
mbar)
Measured gases
Non-corrosive gases
Electromagnetic compatibility
EN61326-1: Electrical equipment for
measurement, control, and
laboratory use – EMC requirements
– for use in industrial locations