Owner's manual
Table Of Contents
- DMT345/346 USER'S GUIDE
- TABLE OF CONTENTS
- GENERAL INFORMATION
- PRODUCT OVERVIEW
- INSTALLATION
- OPERATION
- Getting Started
- Display/Keypad
- MI70 Link Program for Data Handling
- Serial Line Communication
- LAN Communication
- Communicating with a Transmitter in POLL Mode
- General Settings
- Serial Output Settings
- Data Recording
- Analog Output Settings
- Operation of Relays
- Sensor Functions
- MODBUS
- MAINTENANCE
- CALIBRATION AND ADJUSTMENT
- TECHNICAL DATA
- EXAMPLE INSTALLATION OF DMT346
- CALCULATION FORMULAS
- MODBUS REFERENCE
![](/manual/vaisala/dmt346/owner-s-manual-english/images/img-12.png)
User's Guide _______________________________________________________________________
26 ___________________________________________________________________ M210762EN-G
Wall Mounting with Wall Mounting Kit
When mounting with wall mounting kit the mounting plate (Vaisala
order code: 214829) can be installed directly on wall or onto a standard
wall box (also US junction box). When wiring through back wall, remove
the plastic plug from the wiring hole in the transmitter before mounting.
0604-009
Figure 5 Mounting with Wall Mounting Kit
The following numbers refer to Figure 5 above:
1
=
Plastic mounting plate
2
=
Mount the plate to wall with 4 screws M6 (not provided)
3
=
Arched side up
4
=
Fasten the transmitter to the mounting plate with 4 fixing
screws M3 (provided)
5
=
Holes for wall/junction box mounting
0804-065
Figure 6 Dimensions of the Plastic Mounting Plate (mm/inch)
183 (7.20)
133 (5.24)
116 (4.57)
104 (4.09)
84 (3.30)
59 (2.32)
59 (2.32)
Ø6.2 (0.24)
4.5 (0.18)
10.5 (0.41)
6.5 (0.26)
8.5 (0.33)
Thickness
9.5 (0.37)