User`s guide
Table Of Contents
- DMT345/346 USER'S GUIDE
- TABLE OF CONTENTS
- GENERAL INFORMATION
- PRODUCT OVERVIEW
- INSTALLATION
- OPERATION
- Getting Started
- Display/Keypad
- MI70 Link Program for Data Handling
- Serial Line Communication
- LAN Communication
- Communicating with a Transmitter in POLL Mode
- General Settings
- Serial Output Settings
- Data Recording
- Analog Output Settings
- Operation of Relays
- Sensor Functions
- MODBUS
- MAINTENANCE
- CALIBRATION AND ADJUSTMENT
- TECHNICAL DATA
- EXAMPLE INSTALLATION OF DMT346
- CALCULATION FORMULAS
- MODBUS REFERENCE
Chapter 4 _________________________________________________________________ Operation
VAISALA ________________________________________________________________________ 67
Menus and Navigation
You can change settings and select functions in the menus.
1. Open the Main Menu by pressing any of the ▲▼◄► arrow
buttons in the basic (numeric) display mode.
2. Move in the menus by using the ▲▼ arrow buttons.
3. Open a submenu with the ► button.
4. Press ◄ to return to the previous level.
5. Function button EXIT returns you back to the basic display.
Adjustment menu is displayed only when ADJ button (on the
motherboard inside the transmitter) is pressed.
0706-011
Figure 43 Main Views
Some menu items, such as Relay outputs in the Interfaces menu, are
only shown if supported by the transmitter and the installed options.