Owner manual

HMI41 AND PROBES
Operating Manual M210316EN-A
26
7. TRANSFERRING THE STORED READINGS TO A PC
The readings that have been stored in the HMI41 memory manually or
automatically in the data collecting mode, can be transferred to a computer
and then printed if desired. In order to do this, connect a serial connection
cable (order code 19446ZZ) to the appropriate connectors on your PC and in
the HMI41:
Figure 7.1 Connecting the cable
7.1 Giving the communication parameters
Give the communication parameters when using this terminal session for the
first time; save them for future use. See instructions in the following tables.
Table 7.1.1 Giving parameters in Windows 3.1
MENU DESCRIPTION
PROGRAM MANAGER
ò
ACCESSORIES
double click
ò
TERMINAL
double click
ò
Settings
click
ò
Communications
click and select parameters
(see figure 7.1.1 next page);
click OK
ò
move the cursor to:
File
click
ò
Save as
click and save settings: type
the name of the file (e.g.
HMI41) and click OK
Turn the HMI41 on and follow the instructions in Ch. 7.2
connect the
serial cable
to the
EXT
connector