Owner's manual

Chapter 4 ______________________________________________________________ Maintenance

VAISALA _______________________________________________________________________ 27

Remote Probe Model

1. Unscrew the small sleeve that secures the probe in place at the end

of the probe cable and pull out the probe.

2. Replace the probe and screw the small sleeve back on, securing the

probe tightly in place.

0506-006

Figure 12 Removing the Humidity Probe (Remote Probe

Model)

The following numbers refer to Figure 12 above:

1 = Probe cable

2 = Sleeve securing the probe to the cable

3 = HMP100 probe