User`s guide

User's Guide _______________________________________________________________________

_________________________________________________________________________________

T°C

Press HOLD while the arrow is displayed to scroll the measurement results (note

that the sequence number changes):

T°C

HOLD:

T°C

etc.

If the button HOLD is pressed continuously, numbers change in a faster rate.

MIN and MAX in data collecting REC READ

mode

When the data collecting REC READ mode has been activated, the HOLD button

brings four different modes on the display: MIN HI, MAX HI, MIN LO and MAX LO.

These modes indicate the maximum and minimum readings measured for the

quantities on the display.

HI and LO tell you whether the reading observed is the

one on the first line (

HI) or the one on the second line (LO). MIN and MAX indicate

whether the reading on the display is the minimum or the maximum value. In

other words, if the text is MIN HI it means that you are now observing the

minimum reading of the quantity on the first line.

By pressing HOLD repeatedly you can change from one display mode to another,

and by pressing MODE you can change the quantity on the first line. In all these

modes, the decimals of the second line reading are shown by pressing the button

ENTER.