Manual

User's Guide _______________________________________________________________________
16 ___________________________________________________________________ M210474EN-C
Probe Options
1311-199
Figure 2 MMT310 Probes
The following numbers refer to Figure 2 above:
1
=
MMT317 probe with optional Swagelok connector for tight-place
installations.
2
=
MMT318 probe for pressurized pipelines with two adjustable
probe lengths and optional ball valve set.
For probe dimensions, see section MMT317 Probe with Optional
Swagelok Connector, Dimensions on page 74 and section MMT318
Probe Dimensions on page 72.
Filter Options
MMT310 filter options include stainless steel filters with 3.15 mm and
1.5 mm (for high flow velocity oil measurements) holes. The filters are
12 mm in diameter with a female thread. The filters recommended for a
probe type can be selected on the corresponding MMT310 order form.
For information on ordering accessories, see section Spare Parts and
Accessories on page 69.