Manual

Chapter 4 _________________________________________________________________ Operation
VAISALA ________________________________________________________________________ 33
USB Connection
MMT310 can be connected to a computer by using a USB cable (order
code 238607). The USB cable is an optional accessory: for more
information on ordering optional items, see section Spare Parts and
Accessories on page 69.
NOTE
Before starting to use the USB cable, you must install the USB cable
driver
(requires Windows).
Installing the Driver for the USB Cable
Complete the following steps to install the USB driver before taking the
USB cable into use:
1. Check that the USB cable is not connected. Disconnect the cable if
you have already connected it.
2. Insert the media that came with the cable, or download the driver
from www.vaisala.com.
3. Execute the USB driver installation program (setup.exe), and
accept the installation defaults. The installation of the driver may
take several minutes.
4. After the driver has been installed, connect the USB cable to a USB
port on your computer. Windows will detect the new device, and
use the driver automatically.
5. The installation has reserved a COM port for the cable. Verify the
port number, and the status of the cable, using the Vaisala USB
Device Finder program that has been installed in the Windows Start
menu.
Windows will recognize each individual cable as a different device, and
reserve a new COM port. Remember to use the correct port in the
settings of your terminal program.