User`s guide

User’s Guide ______________________________________________________________________
104 __________________________________________________________________M210662EN-A
0201-046
Figure 88 Selecting an Upload Configuration File
3. When the file has been transferred, MAWS starts executing the
new setup according to the settings in the configuration file.
Data Logging
Logging means storing of the measured and calculated data in the
MAWS internal memory, that is, to 2 MB Flash chip with the data
storage capacity of 1.7 MB. Additionally, you may use an external
memory card. For more information, see section Using External
Memory Card on page 120. From the internal and external memory,
logged data can later be retrieved, for example, via serial line.
Logged data is stored in the daily files, for example, L2010326.dat,
which is a binary file. Naming convention is the following:
- All log files begin with the name of the log group. The log group
name consists of a letter followed by a number, that is, L0, L1, L2,
L3, and so on.
- The log group name is followed by the date in the YYMMDD
format.
Everything that MAWS measures and calculates, it can also log in its
Flash memory. Approximate log memory capacity can be checked and
also printed in the Setup information view in MAWS Lizard when a