User`s guide

User’s Guide ______________________________________________________________________
170 __________________________________________________________________M210662EN-A
Still not functioning? Replace the logger and return the damaged one to
Vaisala for repair. For the return instructions, refer to section Return
Instructions on page 199.
Visual Check
Open the door of the enclosure, and check that all the equipment is
present, see Figure 117 on page 170. Check that the logger, power
supply, and communication devices are connected properly to the
connectors inside the enclosure.
0401-193
Figure 117 Enclosure ENC542PLM with Radiation Shield
The following numbers refer to Figure 117 on page 170:
1 = Radiation shield
2 = Enclosure
3 = Tiltable plate with DIN-rail
4 = Two places for the batteries
5 = Logger
6 = Terminal strip
7 = Battery regulator
8 = Connector flange