User`s guide

Chapter 5 ___________________________________________________________ Troubleshooting
VAISALA______________________________________________________________________ 173
0411-045
Figure 119 Connecting the Terminal Cable
2. Start the MAWS Terminal program on your PC.
3. Set the communication parameters: 9600, N, 8, 1.
4. Give the command open (if the connection is not already open).
Figure 120 on page 173 shows the pin order for the terminal connector.
0304-025
Figure 120 COM0 Pins for the Terminal Connector
NOTE
The command open is not echoed on the screen.
The following numbers refer to Figure 120 on page 173.
1 = Not connected
2=RxD
3=GND
4=TxD
5 = Not connected