User`s guide

User’s Guide ______________________________________________________________________
174 __________________________________________________________________M210662EN-A
Recording Terminal Connection
Text
In problem situations, you can save the commands and program
responses that you see in the MAWS Terminal window. Before you
start creating the situation you want to record, clear the terminal buffer.
From the Edit menu, select Clear window. The program removes all
text from the terminal buffer.
To capture all the text shown in the MAWS Terminal window into a
file, select Capture all from the Connection menu. The program starts
saving all text into a file called MAWS_Terminal.Log. This file is stored
in the Default capture text directory you have defined on the
Directories tab in the Preferences window.
When you no longer need the capture file, you can delete it from your
PC. The capture file is called MAWS_Terminal.Log and it is saved in the
Default capture text directory you have defined on the Directories
tab in the Preferences window.
In the problem situations give the following commands battery, errors,
spset, SYSINFO, and warnings. When the Capture all is selected, the
results are saved into a file for future use.
Opening Service Connection
Through MAWS
The command interface of the modem or an intelligent sensor can be
accessed through MAWS, for example, to send the AT commands
manually. To control the modem or sensor directly, open the service
connection to MAWS, and, for example, when the device is connected
to the DSU232’s first communication port at the module place MOD1,
type open DSU232_0_0. To terminate this operation, type close. While
the direct connection to the modem or sensor is open, any automatic
operation through the connected port is blocked. Typical parameters for
the open command are presented in Table 23 on page 175. The
NOTE
The Capture all selection remains on until you remove the selection
from the Connection menu. Remember to remove the selection as
soon as you have recorded enough messages, otherwise it creates a
large file that reserves your disk space.