User`s guide

User’s Guide ______________________________________________________________________
176 __________________________________________________________________M210662EN-A
Error Messages
When typing commands, you may encounter some error messages.
Table 25 on page 176 explains the most typical error messages.
You receive the following
message:
You are trying to connect to a
port that does not exist in your
computer.
Check the port settings.
The port is reserved (some other
program is connected to it).
It is possible, that you have
already opened the MAWS
Terminal program, minimized the
window and forgotten you have
already opened it, and then tried
to open the program again.
You do not receive any
messages.
Cables are not connected. Connect the cables as shown in
section Establishing Terminal
Connection on page 79.
Table 25 Error Messages
Error Message Probable Cause Remedy
Error: Executable not found Typing error. Correct typing.
Syntax error! Typing error: non-acceptable
characters, e.g., +
Error: Directory not found Typing error in directory name.
Error: Wrong number of
parameters
A missing or extra parameter. Check the command syntax
(help command) and give the
command again.
Error: Missing parameter A missing parameter.
Table 24 Some Common Connection Problems and Their
Remedies (Continued)
Problem Probable Cause Remedy