User`s guide

User’s Guide ______________________________________________________________________
22 ___________________________________________________________________M210662EN-A
In addition, the enclosure has a pressure compensation element installed
at the bottom plate. This element compensates for varying degrees of
pressure caused by the temperature differences. This membrane
element together with high quality plastic material significantly reduces
water condensation inside the enclosure.
For future needs, the enclosure has space reserved for optional devices.
These can be mounted, for example, on the DIN-rail beneath the tiltable
installation plate (number 3 in Figure 6 on page 22).
0401-193
Figure 6 Enclosure ENC542PLM with Radiation Shield
The following numbers refer to Figure 6 on page 22:
1 = Radiation shield
2 = Enclosure
3 = Tiltable plate with DIN-rail
4 = Two places for the batteries
5 = Logger
6 = Terminal strip
7 = Battery regulator
8 = Connector flange