User`s guide

User’s Guide ______________________________________________________________________
80 ___________________________________________________________________M210662EN-A
0411-045
Figure 72 Connecting the Terminal Cable
2. Start the MAWS Terminal program on your PC, as instructed in
section Using MAWS Terminal Software on page 81.
3. Set communication parameters: 9600, N, 8, 1.For more
information, see section Opening MAWS Service Connection on
page 87.
4. Give the command open (if the connection is not already open).
For more information, see section Giving Commands on page 89.
Figure 73 on page 80 shows the pin order for the terminal connector.
0304-025
Figure 73 COM0 Pins for the Terminal Connector
NOTE
The command open is not echoed on the screen.