User guide

Viewing Device Details
viewLinc 4.1 Administrator Guide 47
Additional properties are available for HMT140 Series
Transmitters:
•
Timeout: Number of Seconds to wait for a beacon
before failing the ‘Add’ operation.
•
UDP Port: The UDP port viewLinc uses to listen for
devices.
•
Max Blocks per Beacon: The maximum size of the
backfill. It is limited to conserve battery life.
Note: Do not change the ‘Max blocks per beacon’
property for HTM140 devices without first con-
sulting your technical support department as this
setting will adversely affect battery life.
• Retry Count: Number of times a beacon is transmitted
by the device if it fails to receive an ACK (acknowledge
response).
•
Transmit Period: The frequency of beacon
transmissions
•
Sample Rate: The frequency that samples are taken in
the device
Viewing Device Details
viewLinc provides extended device information in the device
details column of the device manager. To see this