User guide

Editing Channel Properties and Aliases
viewLinc 4.1 Administrator Guide 51
6
Click OK to save.
If you do not want to use the system default temperature
units (set on the
Options | System Configuration | Preferences
tab), you can modify the temperature units used for a specific
location. To clear existing unit preferences and accept the
system default, you will need to edit the location from the
Locations manager and select the option
Use System Default.
To edit calibration properties:
1 From Options | System Configuration | Device Manager,
select the Host and then the device whose channel’s
properties you want to edit.
2 Select the channel you want to edit.
3 On the Options | Channel menu select Edit Channel or
right-click and select
Edit Channel.
4 In the Edit Channel Properties dialog box, make sure a
device which supports calibration properties is selected
(i.e. the HMT 140 Series Transmitter). Calibration
properties can only be edited once the initial values have
been downloaded from the device.