Manual

Chapter 3 _________________________________________________________ Retrofit Installation
VAISALA _______________________________________________________________________ 21
- Correct mounting adapter for your installation; FIX30 or FIX60, see
Figure 7 below. The diameter of the mounting adapter for FIX30/60
adapter is 61 mm. Change the mounting adapter if necessary. If you
are not sure that you have the correct mounting adapter, contact
Vaisala.
1005-036
Figure 7 Mounting Adapter for FIX30/60 (Left) and
Mounting Adapter (Right)
- Correct cables for the mounting kit and analog output/serial
communication. Table 3 on page 22 lists the available cables for
retrofit installation. The In/Out stands for the possibility to route the
cable either inside of outside of the mast.
NOTE
If you have FIX30, do not use the adapter cables but order the
appropriate WMT700 cable. The adapter cable will not fit inside the
mast.