Manual

TECHNICAL REFERENCE___________________________________________________________
76 __________________________________________________________________ M211097EN-C
Configuration Mode/
Measurement Mode
and Profile
Command Description
Further Information
1
Measurement mode
WMT700 profile
OPEN Switches the serial port to
configuration mode.
User's Guide
Measurement mode
WMT700 profile
POLL Fetches data from WMT700. User's Guide
Measurement mode
WMT700 profile
SLEEP Switches WMT700 from normal
operating mode to low-power mode.
User's Guide
Measurement Mode
MES12 profile
@a M 12 Polls data from WMT700 in the
MES12 data message format.
User's Guide
Measurement mode
WS425 ASOS F/G
profile
WA Requests average wind speed and
direction message.
Technical Reference
Measurement mode
WS425 ASOS F/G
profile
WS Requests the verbose Built-In Test
(BIT) results.
Technical Reference
Measurement mode
WS425 A/B NMEA
Extended profile
$WIP Polls data from WMT700. Technical Reference
Measurement mode
WS425 A/B ASCII profile
I Requests identification information
for WMT700.
Technical Reference
Measurement mode
WS425 A/B ASCII profile
Wx Starts measurement based on
averaging time and fetches the
data.
Technical Reference
Measurement mode
WS425 A/B WAT11
profile
<esc><id> Polls data from WMT700. Technical Reference
Measurement mode
SDI-12 profile
?! Queries WMT700 for its address. Technical Reference
Measurement mode
SDI-12 profile
a! Ensures that WMT700 is
responding.
Technical Reference
Measurement mode
SDI-12 profile
aI! Queries WMT700 for its SDI-12
compatibility level, model number,
and firmware version number.
Technical Reference
Measurement mode
SDI-12 profile
aAb! Changes WMT700 address. Technical Reference
Measurement mode
SDI-12 profile
aC! Starts concurrent measurement. Technical Reference
Measurement mode
SDI-12 profile
aCC! Starts concurrent measurement.
CRC is included in the response.
Technical Reference
Measurement mode
SDI-12 profile
aD0! Fetches instant data from WMT700. Technical Reference
Measurement mode
SDI-12 profile
aM! Starts measurement. Technical Reference
Measurement mode
SDI-12 profile
aMC! Starts measurement.
CRC is included in the response.
Technical Reference
Measurement mode
SDI-12 profile
aV! Starts verification. Technical Reference