Manual

Chapter 1 ________________________________________________________ General Information
VAISALA ________________________________________________________________________ 7
CHAPTER 1
GENERAL INFORMATION
This chapter provides general notes for the manual and WMT701,
WMT702, and WMT703.
About This Manual
This manual contains instructions for upgrading to Vaisala WINDCAP
®
Ultrasonic Wind Sensor series WMT700 and using analog output and
serial communication in a system configured for WS425.
Contents of This Manual
This manual consists of the following chapters:
- Chapter 1, General Information, provides general notes for the manual
and WMT701, WMT702, and WMT703.
- Chapter 2, Introduction, provides general information on upgrading
from WS425 to WMT700 wind sensor series.
- Chapter 3, Retrofit Installation, describes the retrofit installation
procedure for WMT700.
- Chapter 4, Operating WMT700 in WS425 Analog Output Mode,
provides information on operating WMT700 in analog output m
ode in
a system configured for WS425.
- Chapter 5, Operating WMT700 with WS425 and SDI-12 , provides
inform
ation for operating WMT700 in serial operation mode with
WS425 or SDI-12 profiles.
- Chapter 6, Troubleshooting, describes common problems, their
probable causes and remedies, and provides contact information for
technical support.
- Appendix A, Complete Command Set for WMT700, lists all the
commands available for WMT700.