Installation guide

SV-GPS-250 Installation and Configuration
8-4 SkyView System Installation Guide - Revision R
Figure 55–SV-GPS-250 Connected to Multiple SkyView Displays
If there is more than one SV-GPS-250 in your system, use the same scheme in Figure 55 on
different display serial ports for the other SV-GPS-250 modules, but connect power and ground
for the other SV-GPS-250 modules to the same power and ground connections (black and
orange wires) that are provided in the serial port 5 wiring bundle on the display harnesses. An
example of this configuration follows.