Installation guide

Autopilot Servo Installation, Configuration, and Calibration
10-2 SkyView System Installation Guide - Revision R
If you no longer have this capability, contact Dynon Technical Support (contact
information at the beginning of this manual). Your servos can be returned to Dynon
Avionics for a firmware update.
Dynon Autopilot Servo Models
Dynon currently offers the following servo models:
Model Number
Torque
Attachment
SV32
36 inch-pounds
Standard Arm
SV32L
Long Arm
SV32C
Capstan
SV42
55 inch-pounds
Standard Arm
SV42L*
Long Arm
SV42C
Capstan
SV52
72 inch-pounds
Standard Arm
SV52L*
Long Arm
SV52C
Capstan
Table 41–Dynon Servos
* SV42L/SV52L servos are special order items–contact Dynon Avionics for details.
Compass Calibration Requirement
The SkyView autopilot requires an accurate magnetic heading to operate efficiently and
comfortably in heading mode and the radio-based VOR/NAV mode. Therefore it is critical that
the ADAHRS be installed correctly, calibrated, and operating well in all attitudes.
Additional Resources
Dynon’s Internet sites provide frequently updated information on installation and operation
issues:
http://wiki.dynonavionics.com – Dynon’s Documentation Wiki provides additional technical
information on Dynon products.