Installation guide

Accessory Installation and Configuration
SkyView System Installation Guide - Revision R 15-11
the performance of the probe. You will, however, need to take it into account when doing
pressure/leak tests on your pitot system.
Calibration
It is your responsibility to fly your plane safely while performing any configuration
or calibration in flight. The best scenario includes a second person to perform any
necessary steps on any SkyView components.
You should familiarize yourself with the AOA calibration procedure before flight by
reading through the instructions in the AOA Calibration Wizard (SETUP MENU >
HARDWARE CALIBRATION > ADAHRS CALIBRATION > AOA CALIBRATION).
Once you are flying straight and level at a safe altitude for stalls, go into the AOA Calibration
Wizard (IN FLIGHT SETUP MENU > AOA CALIBRATION…) and follow the onscreen instructions to
calibrate angle of attack.