Installation guide

SkyView System Installation Guide - Revision R 16-1
16. SV-COM-C25 Installation, Configuration, and Testing
Note: SV-COM-C25 is the complete radio system, consisting of the SV-COM-PANEL
control panel installed on the panel, and the SV-COM-425 transceiver installed
elsewhere. Installation instructions for the SV-INTERCOM-2S (referenced in these
instructions) has its own, separate manual, available for download at
http://docs.dynonavionics.com
Read and understand the System Planning Chapter before installing the SV-COM-
C25.
Do not transmit without an antenna connected. Doing so will damage your SV-
COM-C25.
Figure 98 - Suggested SV-COM-C25 Installation, Configuration, and Testing Procedure