Installation guide

SkyView System Installation Guide - Revision R 18-1
18. SV-AP-PANEL Installation
This chapter contains pre-installation considerations, installation instructions, and details to
install the SV-AP-PANEL/H (Horizontal orientation) and SV-AP-PANEL/V (Vertical orientation).
Physically, electronically, and operationally, the two versions are identical, and hereafter
referred to SV-AP-PANEL.
The SV-AP-PANEL is an optional control panel for a SkyView system that provides one-button
controls for the SkyView Autopilot that are otherwise operated from the SkyView display menu
buttons (which are still accessible after the installation of an SV-AP-PANEL). As the SV-AP-PANEL
allows for expert autopilot mode controls including IAS, VNAV, and approach sequencing, the
buttons on the SV-AP-PANEL are enabled only when the SkyView AP is set to EXPERT mode
(SETUP MENU > AUTOPILOT SETUP > AUTOPILOT CONTROLS > EXPERT). Up to two SV-AP-
PANELs can be installed in a SkyView system.
Figure 115 is an overview of suggested steps for SV-AP-PANEL installation.
Figure 115 - Overview of SV-AP-PANEL Installation